background image

76

Reference

Main Menu: Comm Tab

•   NMEA In/NMEA Out— supports the output of standard NMEA 0183 version 2.3* data, and sonar 

NMEA input support for the DBT, DPT, MTW, and VHW sentences. (See page 86.)

•   None— provides no interfacing capabilities.

Port 2—

•   NMEA On/NMEA Off—  supports the output of standard NMEA 0183 version 2.3* data, and sonar 

NMEA input support for the DBT, DPT, MTW and VHW sentences. (See page 86.)

* Units with software version 5.20 and higher will use NMEA 0183 version 3.01.

To select an input/output format:

1.  Highlight the ‘Serial Data Format’or ‘Port 2 NMEA’ field and press 

ENTER/MARK

.

2.  Use the 

ARROW KEYPAD

 to select the desired setting and press 

ENTER/MARK

.

To select a transfer mode:

1.  Use the 

ARROW KEYPAD

 to select ‘Garmin Data Transfer’ in the ‘Serial Data Format’ field.

2.  Highlight the ‘Transfer Mode’ field and press 

ENTER/MARK

.

3.  Use the 

ARROW KEYPAD

 to select the desired setting and press 

ENTER/MARK

.

To restore the Serial Data Format settings back to the default ‘Garmin Data Transfer’:

1.  From the Comm tab, press the ‘Defaults’ 

SOFT KEY

.

Advanced NMEA Output Setup

The GPSMAP 2006/2010 NMEA data transmission can be customized to change the precision of the 

Lat/Lon minutes, set up the waypoint IDs, and keep the output rate at two seconds. If the unit is set up 
to output all of the available NMEA sentences, the output rate may exceed two seconds.The ‘Advanced 
NMEA Output Setup’ page will allow you to turn On/Off the GPS Status (GSA, GSV), Waypoint/Route 
(WPL, RTE) and the Garmin Proprietary sentences.

Advanced NMEA Output Setup:

1.  Press the ‘NMEA Setup’ 

SOFT KEY

 located along the bottom of the screen to activate the ‘Advanced 

NMEA Output Setup’ page.

2.  To turn a field On/Off, place the highlight over that field and press 

ENTER/MARK

. Make a selection and 

press 

ENTER/MARK

 again to accept the selection.

When transferring data between two Garmin units, be sure to 
always set one to ‘Host’ and use the other unit to either Send or 
Request the desired data.

NMEA Sentence Output (NMEA Version 2.30* compliant)
Always transmitted: GPRMC, GPGGA, GPGLL, GPBOD, 

GPBWC, GPVTG, GPXTE, GPRMB 

Switchable sentences: 

GPGSA, GPGSV, GPWPL, GPRTE

Garmin Proprietary: PGRME, PGRMZ, PGRMM

Summary of Contents for GPSMAP 2006









































































































Reviews: