GPSMAP 2106/2110 Owner’s Manual
13
B
ASIC
O
PERATION
>
C
REATING
AND
U
SING
W
AYPOINTS
Creating and Using Waypoints
The GPSMAP 2106/2110 stores up to 4,000 alphanumeric waypoints, each with a
user-defined icon, comment, depth, and water temperature.
NOTE:
If you are using a Garmin GSD 21 or GSD 22 sounder module, the
Depth
and W
ater Temp
fields fill in automatically.
You can create waypoints using three basic methods:
•
ENTER/MARK
—use the
ENTER/MARK
key to quickly mark your
current location.
•
Graphically
—use the map display to define a new waypoint location.
•
Manually
—enter new waypoint coordinates manually.
Creating Waypoints Using the ENTER/MARK Key
Use the
ENTER/MARK
key to capture your current location (or pointer or map
item location) to create a new waypoint. You must have a valid position fix to
mark your current location.
To mark your current location:
1. Press and hold
ENTER/MARK
until the Review Waypoint Page appears.
The GPSMAP 2106/2110 captures its current location and creates a
default name and symbol for the new waypoint.
2. To accept the waypoint with the default name and symbol, press
ENTER
.
To change any of the available waypoint information, see page
.
Review Waypoint Page (BlueChart Data Shown)
Creating Waypoints Using the Map
You can create a waypoint by using the map pointer to point to any map
location or map feature. When you move the pointer over a map item, you see a
highlighted description of the item.
To create a new waypoint using a map location:
1. Use the
ROCKER
to move the pointer to the map location you want.
2. Press and quickly release
ENTER/MARK
to capture the pointer location.
Do not hold the button down; doing so marks your current location, not the
map location. The Review Waypoint Page appears.
3. To accept the waypoint with the default information, press
ENTER
.
OR
To change any waypoint information, highlight the appropriate field and
press
ENTER
. After entering your changes, press the
OK
soft key.
