background image

GPS Options

Press 

MENU

 twice to open the Main Menu. Use the 

ROCKER

 to 

highlight the 

GPS

 tab. Press 

MENU

 to open the options menu.

GPS Tab Options Menu

Start/Stop Simulator

—starts and stops Simulator Mode, which is 

helpful when learning how to use your unit. 

Enable/Disable WAAS

—enables or disables WAAS capability. See 

page 

108

 of the “Appendix” for more information about WAAS.

Track Up Skyview/North Up Skyview

—orients the sky view 

display on the GPS tab to North Up or Track Up. 

New Altitude

—allows you to manually enter your altitude. 

New Location

—allows you to enter a new location automatically or 

using the map.

GPS Tips

•  While the receiver is gathering information, your location 

on the map might appear different from where you actually 

are located. As soon as the receiver gathers enough satellite 

information, your proper location appears on the map.

•  Any time you have traveled more than 600 miles with the 

GPS receiver turned off, the receiver might take longer than 

normal to initialize and find your location.

•  The GPS receiver can lose satellite signals due to interference 

from such items as buildings, tunnels, and heavy tree cover. 

Monitoring the GPS status is recommended. 

•  To learn about GPS, visit 

www.garmin.com/aboutGPS/

.

GPSMAP 276C Owner’s Manual

g

ettIng

 s

tArted

 > 

g

ettIng

 s

AtellIte

 s

IgnAls

Summary of Contents for GPSMAP 276C







































































































































Reviews: