To set a persistent alarm:
1. Highlight the
Alarms
tab on the Main Menu.
2. Highlight the box next to the alarm you want to make
persistent.
3. Press
ENTER
to place a check mark in the
Persist
box.
Navigation (Nav) Alarms
The Nav sub tab contains the following alarms:
Next Turn
—sets an alarm to indicate the next turn in a route. Select
Dist
to specify a distance before you reach the next turn to sound the
alarm. Select
Time
to specify a time before the turn for the alarm to
go off. Select
Auto
for the unit to provide a Next Turn alarm at its
discretion.
Arrival
—sets an alarm to sound when you are a specified distance
or time away from a destination waypoint. Select
Auto
for the unit
to provide an Arrival alarm at its discretion.
Off Course
—sets an alarm to sound when off course. Select
On
,
then enter a distance.
Anchor Drag
—sets an alarm to sound when you exceed a specified
drift distance. Select
On
, and then enter a distance.
System Alarms
Clock
—sets an alarm based on the unit’s clock. Select
On
, and
then enter a specific time that you want the alarm to sound. The
GPSMAP 276C must be on for the clock alarm to work.
Ext. (External) Voltage
—sets an alarm to sound when the external
voltage drops below a specified amount. Select
On
, and then enter a
specific voltage.
DGPS
—sets an alarm to sound when the GPSMAP 276C loses a
differential fix.
Accuracy
—sets an alarm to sound when GPS accuracy falls outside
of the user-set value. Select
On
, and then enter a specific distance.
GPSMAP 276C Owner’s Manual
71
M
AIn
M
enu
>
A
lArMs
t
Ab
Summary of Contents for GPSMAP 276C
Page 1: ...GPSMAP 276C chartplotting receiver owner s manual ...
Page 133: ......
