background image

GPSMAP 3005C Owner’s Manual

B

ASIC

 O

PERATION

 > 

U

SING

 

THE

 GPSMAP 3005C

B

ASIC

 O

PERATION

Using the GPSMAP 3005C

This section explains how to enter and select information with the  

GPSMAP 3005C.

Understanding the Features

The advanced keypad system on the GPSMAP 3005C is designed to allow 

qyou to select options and enter data quickly and conveniently. As you progress 

through this owner’s manual, you are directed to press a specific key or highlight 

a field on the screen. When you are directed to press a key, you should press and 

quickly release the key. If you need to hold down the key for a period of time 

to activate a secondary function, the instructions tell you to do so. The location 

of the highlight is controlled by the 

ROCKER

. When a field is selected on the 

screen, it is highlighted in yellow. 
The following terms are used throughout this manual:

•  Highlight

—move the highlighted area on the screen up, down, left, or right 

with the 

ROCKER

 to select individual fields. Moving the highlight to a 

given location allows you to make a selection, begin data entry, or scroll 

through a list. 

•  Field

—the location on a page where data or an option can be entered and 

displayed. Highlight a  field using the 

ROCKER

 to begin entering data or 

selecting options.

• 

Soft keys

—located along the bottom of the screen, soft keys are used as 

shortcuts to select the most commonly used options for the selected page, 

window, or tab. To select a soft key, press the 

 key directly below it.

•  On-Screen button

—use the 

ROCKER

 to highlight an on-screen button, 

and press 

ENTER

 to select the button.

Field

On-screen 

button

Highlighted field

Soft keys

•  Scroll bar

—When viewing a list of items too long to show on the screen, 

a scroll bar appears along the right side of the list. To scroll through a list, 

press up or down on the 

ROCKER

. Press right or left on the 

ROCKER

 to 

scroll one page at a time.

•  Default

—the factory setting saved in the unit’s memory. You can change 

the settings, but you can also revert to the factory (default) settings when 

you press the 

Factory Dflts

 soft key on the System–General sub tab.

Selecting Options and Entering Data

To select options and enter data, use the 

ROCKER

 to highlight or select an 

item in a list or a field on the screen. Use the 

ENTER

 key, soft keys, and the 

ROCKER

 to select options, enter names and numbers in data fields, and activate 

your selections.

Summary of Contents for GPSMAP 3005C

















































































































Reviews: