GPSMAP 3205 Owner’s Manual
25
B
ASIC
O
PERATION
>
C
REATING
AND
U
SING
R
OUTES
Route List with Information
9. Repeat steps 5–8 until all route points are entered. Press
QUIT
to return
to the Route Page.
Navigating a Saved Route
After you create a route, press the
NAV
key to start the route and use it for
navigation. You can follow a route in the same sequence as it was originally
created, invert and follow the route from the end point back to the beginning
point, or re-evaluate it.
To navigate a saved route:
1. From any page, press
NAV
, and then highlight
Follow Route
on the
Navigation menu.
2. Press the
Pick Saved
soft key to select a saved route. The Select Route
window opens.
3. Use the
ROCKER
to highlight the route you want to navigate, and press
ENTER
. The selected route is shown on the Map Page.
To stop navigating a route:
Press
NAV
, highlight
Stop Navigation
on the Navigation menu, and press
ENTER
.
The following options are available on the Navigation menu by pressing
NAV
while navigating a route:
•
Invert Route
—reverses the route so you can follow it from the end point
back to the beginning.
•
Re-Evaluate Route
—recalculates and reactivates the current route data;
and it selects the route leg closest to your current location as the active leg
(the active leg defines the current from and to waypoints).
Summary of Contents for GPSMAP 3205 - Marine GPS Receiver
Page 1: ...GPSMAP 3205 color chartplotter owner s manual...
Page 111: ......
