GPSMAP 3205 Owner’s Manual
29
B
ASIC
O
PERATION
>
C
REATING
AND
U
SING
R
OUTES
4. Use the
ROCKER
to drag the map pointer to the location where you want
to move the route point, and then press
ENTER
to move the route point.
Planning Routes
You can enter information such as your speed, departure time, fuel flow, and
departure date so your GPSMAP 3205 can estimate information about your trip.
To plan your route:
1. Press the
Plan
soft key on the Route list to open the Plan Route window.
2. Enter planning data for speed and fuel flow. You can also enter the date
and time of your departure. As you enter planning information, the fields
on the Route list are automatically calculated.
NOTE:
Fuel flow rates are measured in units per hour. System setting changes
for units of measure (statute, nautical, or metric) do not affect the fuel flow
measure. You should enter fuel flow rates based on available information for
your boat (operators manual, performance specifications) and note the units of
measure (gallons, liters, and so on).
3. Press
QUIT
to return to the Route List.
To change the data column (Plan Route feature):
1. On the Route list, highlight the adjustment button to the right of the
Course
column header, and press
ENTER
. The middle title is highlighted.
Planning
features
2. Press left or right on the
ROCKER
to select one of nine available planning
features, including
ETA
(Estimated Time of Arrival at point),
Fuel
(to point),
Leg Dist
,
Leg Fuel
,
Leg Time
,
Sunrise
,
Sunset
(at point location), and
Time To
(point).
The unit automatically recalculates each waypoint in the route based on
the planning feature selected.
3. Press
ENTER
when you are finished.
Summary of Contents for GPSMAP 3205 - Marine GPS Receiver
Page 1: ...GPSMAP 3205 color chartplotter owner s manual...
Page 111: ......
