GPSMAP 3205 Owner’s Manual
31
M
AIN
P
AGES
>
C
ONFIGURING
M
AIN
P
AGES
Configuring Main Pages
You can customize each main page to fit your navigational needs, and you can
modify digital data fields and add additional secondary functions to each of
the main pages. As you add optional hardware to the MFD or Garmin Marine
Network, additional function choices might appear automatically.
You can also display other functions, such as a compass, temperature log (if
inputting Garmin or NMEA sonar data), or a second map (Map Page only).
Digital data fields (Digital 1 and Digital 2) can be changed in size and type of
data that is shown in each data field. As you add or remove functions and data
fields, a preview window shows the layout.
Preview window
Adjustment sliders
Configuration Window
To add or remove functions on a main page:
1. Press and hold
DATA/CNFG
to open the Configuration window.
2. Using the
ROCKER
, highlight the function you want to add or remove, and
press
ENTER
. Only functions with a check mark in the check box to the
left of the name appear on the main page. The main page to which you
are adding functions always appears either on the left side (two or three
function windows) or in the upper-left (four or more function windows).
3. When finished, press
QUIT
to return to the main page.
Map Page with Additional Functions
Main page
Digital 1
Compass
Second map
Highway
Page
To change the size of the Digital data fields:
1. Press and hold
DATA/CNFG
to open the Configuration window.
2. Using the
ROCKER
, highlight the
Digital 1
or
Digital 2
adjustment slider,
and press
ENTER
.
Summary of Contents for GPSMAP 3205 - Marine GPS Receiver
Page 1: ...GPSMAP 3205 color chartplotter owner s manual...
Page 111: ......
