90
GPSMAP 3205 Owner’s Manual
A
PPENDIX
>
LORAN TD S
YSTEM
LORAN TD System
LORAN-C is a radio navigation aid operated and maintained in the United States
by the United States Coast Guard. The LORAN (LOng RAnge Navigation)
system covers the entire United States and the U.S. Coastal Confluence Zone.
From the perspective of a mariner, the system is used for ocean and coastal
navigation. It can be used as a supplemental system for harbor and harbor
approach navigation, and it is used for inland navigation by recreational vehicles.
LORAN TD Feature
The LORAN TD (Time Delay) feature eases the transition from using LORAN
to using GPS. The GPSMAP unit automatically converts GPS coordinates to
LORAN TD for those who have a collection of LORAN fixes for favorite fishing
spots and other waypoints recorded as TDs. You can display your position as a
TD or enter waypoints as TDs. The accuracy to be expected from this conversion
is approximately 30 meters. When the unit is placed in the LORAN TD format
mode, it simulates the operation of a LORAN receiver. Position coordinates may
be displayed as TDs, and all navigation functions may be used as if the unit was
actually receiving LORAN signals.
Using the LORAN TD Format
When creating new waypoints using LORAN TD coordinates, you must set the
correct LORAN chain number and secondary stations in the
Setup TD
field
before storing a waypoint. You must have the correct chain number as well as the
secondary station identifiers to use this option correctly. These values vary for
each coordinate set or geographical location. Failure to enter correct information
could result in inaccuracies for the desired destination. After the waypoint is
stored in the unit’s memory, it always references the LORAN chain number
and secondary stations currently selected in the
Setup TD
field. If you enter a
different LORAN chain number, change the secondary stations or offsets in the
Setup TD field, the active waypoint information reflects those changes. Because
the GPSMAP 3205 unit does not rely on the LORAN signal for navigation, it
can reference a different GRI chain or secondary stations and still navigate to the
location stored in memory.
The LORAN Position Format field is located on the Units sub tab on the Main
Menu—System tab. The Loran TD Setup window contains the fields to select the
LORAN Chain Number, Primary and Secondary Stations, and TD Offsets.
To set up LORAN TD from the Main Menu:
1. Using the
ROCKER
, highlight the
System
tab, press right on the
ROCKER
to highlight the
Units
sub tab. Highlight the
Position Format
field, and press
ENTER
.
2. Highlight
Loran TD
, and press
ENTER
, and then highlight the
Setup
button to the right, and press
ENTER
again.
3. To change the settings of any of the five fields, highlight the field, press
ENTER
, select the setting you want, and press
ENTER
again.
Summary of Contents for GPSMAP 3205 - Marine GPS Receiver
Page 1: ...GPSMAP 3205 color chartplotter owner s manual...
Page 111: ......
