background image

To clear the track log:

1.  Press 

MENU

 twice to show the Main Menu.

2.  Highlight 

Track

, then highlight the 

Active

 sub tab to the right.

3.  Select the 

Clear

 button, and press 

ENTER

.

Clearing the track log

4.  Highlight 

OK

, and press 

ENTER

. Press 

QUIT

 to exit.

To save the entire track log:

1.  Press 

MENU

 twice to open the Main Menu. 

2.  Highlight 

Track

, then highlight the 

Active

 sub tab to the right.

3.  Use the 

ROCKER

 to select 

Save

, and press 

ENTER

.

4.  A window pops up asking if you want to save the entire 

track log. To save the entire track, highlight 

Yes

, and press 

ENTER

To save a portion of the track log:

1.  Press 

MENU

 twice to open the Main Menu. 

2.  Highlight the 

Track

 tab, and highlight the 

Active

 sub tab.

3.  Use the 

ROCKER

 to select 

Save

, and press 

ENTER

.

4.  To save only a portion of the track, highlight 

No

, and press 

ENTER

 when the window appears. 

5.  Select a beginning point, and press 

ENTER

. Select an 

ending point, and press 

ENTER

. The Track Review Page 

automatically opens.

Saving a portion of the track log

6.  Highlight 

OK

, and press 

ENTER

 to save the track. Press 

QUIT

 to exit.

GPSMAP 396 Pilot’s Guide 

87

A

UTOMOTIVE

 M

ODE

 P

AGES

 

AND

 F

EATURES

 > 

M

ANAGING

 Y

OUR

 T

RACKS

Summary of Contents for GPSMAP 396 - Aviation GPS Receiver





































































































































































































Reviews: