GPSMAP
®
4000/5000 Series Owner’s Manual
Using Charts
U
Sin
G
C
hart
S
Other features common to most charts include depth contour lines (with deep water represented in
white), intertidal zones, spot soundings (as depicted on the original paper chart), navigational aids
and symbols, and obstructions and cable areas.
Navigating to a Point on the Chart
1. From the Home screen, select
Charts
.
2. Select
Navigation Chart
,
Fishing Chart
, or
Radar Overlay
.
3. Select the point on the chart where you want to go.
4. Select
Navigate To
.
5. Select
Go To
(or
Guide To
when using a preprogrammed BlueChart g2 Vision card for Auto
Guidance).
6. Follow the colored line on the screen to the destination.
To create a route to a point on the chart, see
.
Panning the Navigation Chart
Use the
ROCKER
on your GPSMAP 4000 series unit to move the map pointer ( ) away from
your current location and to scroll to other areas on the navigation chart. As you pan past the edge
of the current map display, the screen scrolls forward to provide continuous map coverage. Touch
and drag the Navigation screen on your GPSMAP 5000 series unit to pan away from your current
location. The position icon ( ) stays at your present location. If the position icon leaves the map
when you pan, a small window appears in the corner so that you can keep track of your current
position.
As you move the map pointer, its coordinates, distance, and bearing from your current location
appear in the upper-left corner of the map.
To pan the map, press up, down, right, or left on the
ROCKER
(GPSMAP 4000 series), or touch
and drag the Navigation screen (GPSMAP 5000 series).
Map
pointer
Position
window
Pan
options
Pointer distance
and bearing
from current
location
Pointer
coordinates
To stop panning, select
Stop Panning
.
Summary of Contents for GPSMAP 4008 - Marine GPS Receiver
Page 1: ...GPSMAP 4000 5000 Series owner s manual...
Page 55: ......
