Garmin
transducers
- In-hull plastic housing
- Depth only
- 50/200 kHz
- 600 Watts
- 25 ft cable
- No holes to drill or hull protrusions on solid fiberglass up
to 1" thick & aluminum hulls under .15" thick
- Recommended for planning hull power boats, trailered
boats, rigid inflatable boats (RIBS) and racing sailboats
- Adjustable for deadrise angles up to 22°
In-Hull/Shoot Thru Airmar P79
Part Number
010-10327-00
These transducers have the following features,
in addition to what is listed below:
- Beam width:
50 kHz- 45°
200 kHz- 12°
- Depth Range:
50 kHz- 800 ft to 1200 ft
200 kHz- 400 ft to 700 ft
- Thru-hull plastic housing
- 50/200 kHz
- 600 Watts
- 39 ft cable
- Low profile design has no effect on
your boats running performance
- For use on fiberglass and metal hulls
with 0° to 12° of deadrise
- Requires connection to GSD22 for sonar display
Flush Thru-Hull Airmar P319
depth only
010-10194-00
depth & temperature
010-10194-01
- Transom mount plastic housing
- Depth, speed & temperature
- 50/200 kHz
- 600 Watts
- 25 ft cable
- Designed for large outboard and I/O
powered boats up to 35 ft
- Accommodates transom angles of 2° to 20°
Transom Mount Airmar P66
Part Number
010-10192-01
®
58
- Thru-hull bronze housing
- Depth & temperature
- 50/200 kHz
- 600 Watts
- 30 ft cable
- Fixed tilted element compensates for hull
deadrise aiming the beam straight down
resulting in strong echo returns and accurate
depth readings
- For use on fiberglass and wood hulls
- 12° accommodates 8° to 15° hull deadrise
- 20° accommodates 16° to 24° hull deadrise
Flush Thru-Hull
Airmar B60
Tilted Element
20° tilt
010-10982-00
12° tilt
010-10982-01
For Depth only display
(no picture) a NMEA2000
Intelliducer must be used.
Available in transom or thru-hull.
Please call for pricing.
