background image

GPSMAP

®

 6000/7000 Series Owner’s Manual 

107

Sonar 

•  For the GPSMAP 7000 series, use the on-screen keyboard.

3.  Select 

Done

.

Setting the Fish Alarm

Note

: This feature is available only on the GSD 22. 

You can set an alarm to sound when the chartplotter detects a suspended target of the specified size.
1.  From the Home screen, select 

Configure

 > 

Alarms

 > 

Sonar 

Fish

.

2.  Complete an action:

•  Select 

 to sound an alarm for all fish sizes.

•  Select 

 to sound an alarm for medium and large fish only.

•  Select   to sound an alarm for large fish only.

Setting the Contour Fish Alarm

Note

: This feature is available only on the GSD 24 and GSD 26.

You can set an alarm to sound when the chartplotter detects a suspended target within the specified depth range 

and the specified color range.
1.  From the Home screen, select 

Configure

 > 

Alarms

 > 

Sonar 

Fish

 > 

Contour

.

2.  Select 

top

3.  Enter a distance from the top to show an alarm for targets near the surface:

•  For the GPSMAP 6000 series, use the 

Rocker

 or 

Numeric Keypad

.

•  For the GPSMAP 7000 series, use the on-screen keyboard.

4.  Select 

Done

.

5.  Select 

Bottom

.

6.  Enter a distance to the bottom to sound an alarm for targets near the bottom of the water:

•  For the GPSMAP 6000 series, use the 

Rocker

 or 

Numeric Keypad

.

•  For the GPSMAP 7000 series, use the on-screen keyboard.

7.  Select 

Done

.

8.  Select 

Intensity

9.  Select a color, and select 

Back

Setting the Bottom Fish Alarm

Note

: This feature is available only on the GSD 24 and GSD 26.

You can set an alarm to sound when the chartplotter detects a suspended target within the specified range from 

the bottom and the specified color range.
1.  From the Home screen, select 

Configure

 > 

Alarms

 > 

Sonar 

Fish

 > 

Bottom

.

2.  Select 

Span

.

3.  Enter a distance to the bottom to sound an alarm for targets near the bottom of the water:

•  For the GPSMAP 6000 series, use the 

Rocker

 or 

Numeric Keypad

.

•  For the GPSMAP 7000 series, use the on-screen keyboard.

4.  Select 

Done

.

5.  Select 

Intensity

.

6.  Select a color, and select 

Back

.

Transducer Configuration

Setting the Keel Offset

The keel offset compensates for the surface reading for the depth of a keel, making it possible to measure 

depth from the bottom of the keel instead of from the transducer location. Enter a positive number to offset for 

a keel. You can enter a negative number to compensate for a large vessel that may draw several feet of water.

Summary of Contents for GPSMAP 6008









































































































































Reviews: