background image

GPSMAP 60CSx Owner’s Manual 

13

B

ASIC

 O

PERATION

 > 

To move a waypoint on the Map Page:

1.  On the Find Menu, Highlight the 

Waypoints 

icon, and press 

ENTER

 to open the Waypoints 

Page.

2.  Select the waypoint you want to move, and 

press 

ENTER

. The Waypoint Page opens.

3.  Highlight the 

Map

 button, and press 

ENTER

 to 

show the waypoint on the map.

4.  Press 

ENTER

 again to place a 

MOVE

 marker 

next to the waypoint. 

5.  Use the 

ROCKER

 to move the waypoint to a 

new location on the map, and press 

ENTER

.

Original 

location

New location

Moving a waypoint

Averaging the Waypoint’s Location

You can average a new waypoint location over time to 

produce a more accurate location.

 

NOTE: 

You must have a GPS Satellite fix before 

you can average a waypoint’s location. You 

cannot average a waypoint after it has been 

saved to the waypoints list and Mark Waypoint 

page closed.

To calculate the average location:

1.  Press 

FIND

 to open the Find Menu.

2.  Highlight the 

Waypoints 

icon, and press 

ENTER

 to open the Waypoints Page.

3.  Select the waypoint for which you want to 

calculate the average location, and press 

ENTER

4.  Press 

MENU

 to open Options Menu

5.  Highlight 

Average Location

, and press 

ENTER

 to open the Average Location Page. 

The unit begins calculating the average 

location of the waypoint.

Summary of Contents for GPSMAP 60CSx





















































































































Reviews: