GPSMAP 60CSx Owner’s Manual
41
M
AIN
P
AGES
>
Changing the Zoom Range
You can change the zoom range on the Map Page to
view a smaller area in greater detail or view a larger
area with less detail. Press
UP
to decrease the zoom
range and show an area with greater detail; press
DOWN
to increase the zoom range and show a larger
area with less detail.
Zoom in
Zoom out
The current zoom range setting is shown in the
lower-left corner of the Map Page. If no further map
information is available, “overzoom” appears under
the zoom range. When using MapSource maps,
“mapsource” appears below the scale.
Map ranges
Map Orientation
There are two map orientation options: North Up
orients the map like a paper map. Track Up orients the
map in the direction of travel. When using Track Up,
the North arrow indicates the orientation. Set the map
orientation using the Setup Map option.
Map Page Options
Use the Map Page Options Menu to customize the
Map Page. With the Map Page open, press
MENU
. To
select an option, highlight it, and press
ENTER
.
The following options are available:
• Stop (Resume) Navigation
—stops navigation
and is disabled when there is no active navigation.
• Recalculate
—recalculates a route and is
disabled when there is no active navigation.
