GPSMAP 620 Owner’s Manual
Marine Mode: Navigating
Marine Mode: Navigating
To navigate using the GPSMAP 620, first choose a destination,
then set a course or create a route. Follow the course or route on
the Navigation chart or on the Mariner’s Eye or Mariner’s Eye 3D
screen.
tip:
You can also use the Compass screen to follow a course or
route. See
Step 1: Choose a Destination
You can choose a destination using either the Navigation chart or
the
Where to?
menu.
Choosing a Destination Using the Navigation
Chart
1. From the Home screen, touch
Charts
>
Navigation Chart
.
2. On the Navigation chart, touch the place you would like to
navigate to. The pointer icon indicates the destination on the
chart.
tip:
Touch and to zoom in and out. Touch anywhere on
the chart and drag it to pan the map. For more information on using
charts, see
.
Choosing a Destination Using Where To?
1. From the Home screen, touch
Where To?
2. Touch a category:
Waypoints
—view a list of locations you marked previously
(
).
Routes
—view a list of routes you saved previously (
Tracks
—view a list of recorded tracks (
Offshore Services
—view a list of nearby marinas and other
offshore points of interest, listed by proximity (
Search by Name
—search nearby marinas and other
offshore points of interest by name (
).
3. Touch the location you want to navigate to.
Step 2: Set and Follow the Course
You can set a course three ways:
go to
—(direct course) creates a direct line from your current
).
route to
—create a route from the destination to your current
location, adding turns along the way (
).
•
•
•
•
•
•
•
Summary of Contents for GPSMAP 620
Page 1: ...GPSMAP 620 owner s manual...
Page 71: ......
