GPSMAP 620 Owner’s Manual
2
Marine Mode: Managing User Data
Copying or Merging MapSource
®
Data to
the GPSMAP 620
Using an SD card:
1. Insert the SD card into your GPSMAP 620 device. The unit
places a file on the card that provides information to MapSource
to format data. This only needs to be done the first time you
copy or merge MapSource data to your device from a specific
SD card.
2. Check your MapSource version on your PC by clicking
Help
>
About MapSource
. If the version is older than 6.12.2, update to
the most current version by clicking
Help
>
Check for Software
Updates
or check the Garmin Web site at
.
3. Insert the SD card into an SD card reader that is attached to the
PC.
4. From MapSource, click on
Transfer
>
Send to Device
.
5. From the Send to Device window, select the drive for the
SD card reader and the types of data you want to copy to your
device.
6. Click
Send
.
7. Insert the SD card into your device.
8. From the Home screen on your device, touch
Information
>
User Data
>
Data Transfer
.
9. Touch
Replace From Card
or
Merge From Card
to copy or
merge the data into your device.
Connecting the device directly to the PC:
1. Power on the unit in marine mode, or switch to marine mode.
2. Connect the device to your computer using a mini-USB cable.
3. From MapSource, click on
Transfer
>
Send to Device
.
4. From the Send to Device window, select the GPSMAP 620.
5. Click
Send
.
Summary of Contents for GPSMAP 620
Page 1: ...GPSMAP 620 owner s manual...
Page 71: ......