Garmin GPSMAP 64, User Manual

Deleting Files

NOTICE

If you do not know the purpose of a file, do not delete it. Your 

device memory contains important system files that should not 

be deleted.

1

Open the 

Garmin

 drive or volume.

2

If necessary, open a folder or volume.

3

Select a file.

4

Press the 

Delete

 key on your keyboard.

Disconnecting the USB Cable

If your device is connected to your computer as a removable 

drive or volume, you must safely disconnect your device from 

your computer to avoid data loss. If your device is connected to 

your Windows computer as a portable device, it is not 

necessary to safely disconnect.

1

Complete an action:
• For Windows computers, select the 

Safely Remove 

Hardware

 icon in the system tray, and select your device.

• For Mac computers, drag the volume icon to the trash.

2

Disconnect the cable from your computer.

Attaching the Wrist Strap

1

Insert the loop of the wrist strap through the slot in the 

device.

2

Thread the other end of the strap through the loop, and pull it 

tight.

Attaching the Carabiner Clip

1

Position the carabiner clip 

À

 in the slots on the mounting 

spine 

Á

 of the device.

2

Slide the carabiner clip up until it locks in place.

Removing the Carabiner Clip

Lift up on the bottom of the carabiner clip, and slide the 

carabiner clip off the mounting spine.

Device Care

NOTICE

Avoid chemical cleaners, solvents, and insect repellents that 

can damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme 

temperatures can occur, because it can cause permanent 

damage.
The device is water resistant to IEC Standard 60529 IPX7. It 

can withstand accidental immersion in 1 meter of water for 30 

minutes. Prolonged submersion can cause damage to the 

device. After submersion, be certain to wipe dry and air dry the 

device before using or charging.

Cleaning the Device

1

Wipe the device using a cloth dampened with a mild 

detergent solution.

2

Wipe it dry.

Troubleshooting

Resetting the Device

If the device stops responding, you may need to reset it. This 

does not erase any of your data or settings.

1

Remove the batteries.

2

Reinstall the batteries.

Restoring All Default Settings

You can reset all settings back to the factory default settings.

Select 

Setup

 > 

Reset

 > 

Reset All Settings

 > 

Yes

.

12

Appendix