background image

Introduction

 WARNING

See the 

Important Safety and Product Information

 guide in the 

product box for product warnings and other important 

information.

Device Overviews

GPSMAP Device Overview (No Camera)

GPS/GLONASS/Galileo antenna

Keys

Power key

Mini-USB port (under weather cap)

MCX connector for GPS antenna (under weather cap) *

microSD

®

 card slot (under batteries)

Battery compartment

Mounting spine

Battery cover D-ring

* The MCX connector is not included on all product models.

GPSMAP Device Overview (Camera)

GPS/GLONASS/Galileo antenna

Keys

Power key

Mini-USB port (under weather cap)

Camera lens

microSD card slot (under batteries)

Battery compartment

Mounting spine

Battery cover D-ring

Battery Information

 WARNING

The temperature rating for the device may exceed the usable 

range of some batteries. Alkaline batteries can rupture at high 

temperatures.

NOTICE

Alkaline batteries lose a significant amount of their capacity as 

the temperature decreases. Use lithium batteries when 

operating the device in below freezing conditions.

Maximizing Battery Life

You can do several things to extend the life of the batteries.
• Reduce the backlight brightness (

Adjusting the Backlight 

Brightness

, page 9

).

• Reduce the backlight timeout (

Display Settings

, page 9

).

• Use battery save mode (

Turning On Battery Save Mode

page 1

).

• Decrease the map drawing speed (

Map Settings

, page 3

).

• Turn off GLONASS or GALILEO (

GPS and Other Satellite 

Systems

, page 9

).

Turning On Battery Save Mode

You can use battery save mode to prolong the battery life.

Select 

Setup

 > 

Display

 > 

Battery Save

 > 

On

.

In battery save mode, the screen shuts off when the backlight 

times out. You can select   to turn on the screen, and you can 

double tap   to view the status page.

Long-Term Storage

When you do not plan to use the device for several months, 

remove the batteries. Stored data is not lost when batteries are 

removed.

Installing a NiMH Battery Pack

The device operates using a NiMH battery pack (optional) or two 

AA batteries (

Installing AA Batteries

, page 2

).

1

Turn the D-ring counter-clockwise, and pull up to remove the 

cover.

2

Locate the battery pack  .

3

Insert the battery pack, observing polarity.

4

Gently press the battery pack into place.

5

Replace the battery cover, and turn the D-ring clockwise.

Introduction

1

Summary of Contents for GPSMAP 64X Series





















Reviews: