background image

Charging the Battery Pack

NOTICE

To prevent corrosion, thoroughly dry the USB port, the weather 

cap, and the surrounding area before charging or connecting to 

a computer.
Do not attempt to use the device to charge a battery that was 

not provided by Garmin

®

. Attempting to charge a battery that 

was not provided by Garmin can damage the device and void 

the warranty.

Before you can connect the straight connector of the USB cable 

to your device, you may need to remove optional mount 

accessories.

NOTE: 

The device does not charge when outside the approved 

temperature range (

Specifications

, page 13

).

You can charge the battery using a standard wall outlet or a 

USB port on your computer.

1

Pull up the weather cap   from the mini-USB port  .

2

Plug the small end of the USB cable into the mini-USB port.

3

Plug the USB end of the cable into an AC adapter or a 

computer USB port.

4

If necessary, plug the AC adapter into a standard wall outlet.
When you connect the device to a power source, the device 

turns on.

5

Charge the battery completely.

Installing AA Batteries

Instead of the optional NiMH battery pack (

Installing a NiMH 

Battery Pack

, page 1

), you can use two alkaline, NiMH, or 

lithium batteries. This is useful when you are on the trail and 

cannot charge the NiMH battery pack. Use NiMH or lithium 

batteries for best results.

NOTE: 

Standard alkaline batteries are not recommended for the 

64sc/csx models when using the camera feature.

1

Turn the D-ring counter-clockwise, and pull up to remove the 

cover.

2

Insert two AA batteries, observing polarity.

3

Replace the battery cover, and turn the D-ring clockwise.

4

Hold  .

5

Select 

Setup

 > 

System

 > 

AA Battery Type

.

6

Select 

Alkaline

Lithium

Traditional NiMH

, or 

Precharged 

NiMH

.

Turning On the Device

Hold  .

Keys

FIND

Select to open the search menu.

MARK

Select to save your current location as a waypoint.

QUIT

Select to cancel or return to the previous menu or page.
Select to scroll through the main pages.

ENTER

Select to select options and acknowledge messages.

MENU

Select to open the options menu for the page that is 
currently open.
Select twice to open the main menu (from any page).

PAGE

Select to scroll through the main pages.

     

Select  ,  ,  , or   to select menu options and move the 
map cursor.

IN

Select to zoom in on the map.

OUT

Select to zoom out on the map.

Acquiring Satellite Signals

It may take 30 to 60 seconds to acquire satellite signals.

1

Go outdoors to an open area.

2

If necessary, turn on the device.

3

Wait while the device searches for satellites.

 flashes while the device determines your location.

 shows the satellite signal strength.

Using the Main Pages

The information needed to operate this device is found on the 

main menu, map, compass, trip computer, and elevation plot 

pages.

Select 

PAGE

 to choose the active main page.

Opening the Main Menu

The main menu gives you access to tools and setup screens for 

waypoints, activities, routes, and more (

Additional Main Menu 

Tools

, page 8

).

From any page, select 

MENU

 twice.

Map

 represents your location on the map. As you travel,   moves 

and leaves a track log (trail). Waypoint names and symbols 

appear on the map. When you are navigating to a destination, 

your route is marked with a colored line on the map.

Changing the Map Orientation

1

From the map, select 

MENU

.

2

Select 

Setup Map

 > 

Orientation

.

3

Select an option:
• Select 

North Up

 to show north at the top of the page.

2

Using the Main Pages

Summary of Contents for GPSMAP 64X Series





















Reviews: