GPSMAP 700 Series Owner’s Manual
23
Combinations
When overlay numbers are displayed on the Combination screen, the navigation inset
➌
is shown during
navigation. The compass tape
➍
can be shown or hidden in each overlay.
Combination Screen with Data Overlay
➌
➍
Selecting a Data Overlay on a Combination Screen
1. From the Home screen, select
Combinations
.
2. Select a combination.
3. Select
Menu
>
overlay Numbers
.
4. Select
or
to select a data overlay.
Configuring Data Fields on a Combination Screen
You can select the type of data shown within a data field.
1. From the Home screen, select
Combinations
.
2. Select a combination.
3. Select
Menu
>
overlay Numbers
.
4. Select
or
to select a data overlay.
5. Touch a data field.
6. Select a category of data.
7. Select the data to be displayed.
Configuring the Navigation Inset on a Combination Screen
The navigation inset is shown only when the boat is navigating to a destination.
1. From the Home screen, select
Combinations
.
2. Select a combination.
3. Select
Menu
>
overlay Numbers
.
4. Select
or
to select a data overlay.
5. Select
Navigation Inset
>
Nav. Inset Config.
6. Complete an action:
• Select
Route Leg Details
>
on
to show waypoint velocity made good (VMG) when navigating a route
with more than one leg.
• Select
Next Turn
>
Distance
to show next-turn data based on distance.
• Select
Next Turn
>
Time
to show next-turn data based on time.
• Select
Destination
, and select
Distance
,
Time to Destination
, or
Arrival
to indicate how the
destination data appears.
