I
12
Getting Started
While learning the basic operation of the GPSMAP 76, let’s put the unit
into Simulator Mode. The Simulator Mode is great for practicing with the unit
while inside and satellite signals are not available. When the GPSMAP 76 is in
Simulator Mode, the GPS receiver is turned off (this will help conserve battery
power) and the unit cannot be used for actual navigation.
NOTE: Do not try to navigate using the Simulator Mode. While in the
Simulator Mode, the GPS receiver is turned off. Any Satellite Signal
Strength Indicators displayed are only simulations and do not indicate
the strength of actual satellite signals.
Activating the Simulator Mode
Press the
POWER
Key to turn the unit on. The Welcome Page will be
displayed, press the
PAGE
Key twice to display the GPS Information Page.
Putting the GPSMAP 76 in Simulator Mode:
1. With the GPS Information Page displayed press the
MENU
Key.
2. Using the
ROCKER
Key, highlight ‘Start Simulator’ then press the
ENTER
Key
to accept your selection.
When the Simulator Mode is active, the message ‘Simulating GPS’ will be
displayed along the top of the GPS Information Page.
Highlighted Field
Using the Built-in Simulator
190-00230-00.indd
03/15/01, 9:24 AM
12