background image

Connecting the Power/Data

The power/data cable connects the GPSMAP 76 to a 8-35 volt DC system and 

provides interface capabilities for connecting external devices. The color code in 
the diagram below indicates the appropriate harness connections. Replacement 
fuse is a AGC/3AG - 2.0 Amp fuse.

Interfacing

The following formats are supported for connection of external devices:

GARMIN proprietary Differential GPS (DGPS), NMEA 0180, 0182, 0183 (ver-
sions 1.5, 2.0, 2.3), ASCII Text Output, RTCM SC-104 input (version 2.0).

The following are the sentences for NMEA 0183, version 2.3 output:

Approved sentences — GPRMC, GPGGA, GPGSA, GPGSV, GPGLL, GPBOD, 
GPRTE, and GPWPL; Proprietart sentences — PGRME, PGRMZ, and PSLIB.  The 
GPSMAP 76 also includes NMEA input with support for the DPT, MTW, and 
VHW sentences.  

You can dowload a copy of GARMIN’s proprieatry communication protocol on the 
Help and Support section of our website at www.garmin.com

3

8-35

Brown: Data Out

White: Data In

Black: Ground

Red: Power

61

Getting Started

61

Wiring & Interfacing

Appendix B

Unit View

Data In
White

Power
Red

Ground 
Black

Data Out
Brown

Cable View

Data In
White

Power
Red

Data Out
Brown

Ground
Black

190-00230-00.indd

03/15/01, 9:26 AM

61

Summary of Contents for GPSMAP 76 series


















































































Reviews: