36
Getting Started
36
Reference
Active Leg —
If ‘Off’ is selected, the Active Leg of the Graphic Highway will
not be displayed.
Active Route —
If ‘Off’ is selected, the Graphic Highway will not be dis-
played.
Track Log —
If ‘Off’ is selected, the Track Log will not be displayed.
Saved Tracks —
If ‘Off’ is selected, Saved Tracks will not be displayed.
Setup Highway — ‘Waypoint’ Tab
The ‘Waypoint’ Tab contains the On/Off settings for Next, Route, and Other.
To change a setting, highlight the appropriate fi eld then press
ENTER
. Make
your new selection, then press
ENTER
to accept the selection.
Next —
This setting determines if the next waypoint in a Route will be
displayed. If ‘On’ is selected, you will see the next waypoint in the Route. If
‘On’ is selected and the Route option is set to ‘Off’ only the Next Waypoint
in the Route will be displayed.
Route —
This setting determines if the waypoints in a Route will be dis-
played. If this selection is set to ‘Off’, Route Waypoints will not be on the
Graphic Highway.
Other —
This setting determines if nearby waypoints are displayed.
Active Route/Goto Page
The Active Route/Goto Page will show the waypoint(s) that are currently
being used for navigation. If you are navigating using a ‘Go To’, then the active
waypoint will be displayed with the distance remaining displayed on the right
side of the display. If you are navigating a route, the list of route waypoints is
displayed with the distanceof each leg displayed on the right side of the display.
Pressing the
ROCKER
to the right or left will cycle the data fi eld on the right side
of the display though a variety of data. Pressing
MENU
will display the options
that are available for current navigation.
Setup Highway — ‘Line’ Tab
Setup Highway — ‘Waypoint’ Tab
Highway Page &
Active Route/Goto Page
190-00230-00 Rev B.indd
07/25/01, 9:50 AM
36