42
Getting Started
42
Reference
Editing Waypoints
You can edit waypoints when they are created or after they have been saved to
memory. There are fi ve items that can be changed, the symbol, name, location,
elevation, depth. You can also choose whether to show the waypoint name on
the Map Page.
To edit a saved waypoint —
Press the
MENU
Key twice to display the Main
Menu. Highlight ‘Points’ and press
ENTER
, then highlight ‘Waypoints’ and
press
ENTER
again. Select the desired waypoint from the list (see page 40
for more information on the waypoint lists) and press
ENTER
to display the
Waypoint Page. When fi nished, highlight the ‘OK’ button and press
ENTER
to accept the changes.
Selecting a symbol —
Place the highlight on the symbol fi eld and press
ENTER
. Using the
ROCKER
, select a symbol from the list and press
ENTER
. The selected symbol will be displayed at the waypoint location on
the Map Page.
Changing the Name —
Place the highlight over the name fi eld and press
ENTER
. Using the
ROCKER
(up/down) scroll through the alpha-numeric
list and make a selection. To move the the next placeholder press the
ROCKER
to the right. When fi nished, press
ENTER
to accept the changes.
Changing the Location, Elevation or Depth —
Place the highlight on the
desired fi eld and press
ENTER
. Using the
ROCKER
, scroll through the
numeric list until the desired number is displayed. Press the
ROCKER
to
the right to move to the next character. When fi nished, press
ENTER
to
accept the changes.
Show Name on Maps —
When ‘Show Name on Maps’ is checked, the
waypoint name will be displayed on the Map Page. To check/uncheck the
box, place the highlight over that box and press
ENTER
.
Symbol Field
Name Field
Editing Waypoints
There are four buttons at the bottom of the ‘Mark Way-
point’ Page, ‘Delete’, ‘Map’, ‘Goto’ and ‘OK’. If you wish
to delete the waypoint, highlight the ‘Delete’ button and
press
ENTER
. If you want to see the waypoint on the
map, highlight the ‘Map’ button and press
ENTER
. To
begin direct navigation to the waypoint, highlight the ‘Goto’
button and press
ENTER
. The ‘OK’ button is used to
save any changes that you may have made or to exit the
window.
190-00230-00 Rev B.indd
07/25/01, 9:50 AM
42