Page 3-10
GTS 8XX/GPA 65 Installation Manual
Revision 4TP
190-00587-00
GPS Position/Velocity/Time Source:
Note: At least one source required for ADS-B IN functionality.
Primary
A429 RX Channels 1 - 6 or Disabled
Secondary
A429 RX Channels 1 - 6 or Disabled
Traffic Display Destination:
Note: At least one source is required.
Primary
A429 TX Channels 1 - 6 or Disabled
COM
RS-232 Ports 1 - 5 or Disabled
Transponder 1 & 2 Communication:
Note: At least Transponder 1 RX and TX required for GTS 820 and GTS 850.
Primary should be configured for channels wired to Transponder 1.
Secondary should be configured for channels wired to Transponder 2 in a dual
transponder installation.
Primary RX
A429 RX Channels 1 - 6 or Disabled
Primary TX
A429 TX Channels 1 - 6 or Disabled
Secondary RX
A429 RX Channels 1 - 6 or Disabled
Secondary TX
A429 TX Channels 1 - 6 or Disabled
Top Antenna:
Model
None
Monopole
Garmin GA58
Sensor Systems
Cable loss (dB)
0.2 – 4.0
Note: Cable loss information is described in Fabrication of
Coaxial Cable Assemblies section.
Bottom Antenna:
Model
None
Monopole
Garmin GA58
Sensor Systems
Cable loss (dB)
0.2 – 4.0
Note: Cable loss information is described in Fabrication of
Coaxial Cable Assemblies section.
Note: All A429 options have the ability to select High or Low speed.
Note: If an input is inactive, a
will be displayed.
If an input is active, a
will be displayed.
If an input is in an unknown state, a
will be displayed.
