nüvi 800 Series Owner’s Manual
Appendix
Avoiding Theft
To avoid theft, remove the unit
and mount from sight when not in
use. Remove the residue left on the
windshield by the suction cup.
Do not keep your unit in the glove
compartment.
Register your product at
.
Use the Garmin Lock feature. See
below for more information.
Locking Your nüvi
Garmin Lock
™
is a theft-deterrent system
that locks your nüvi. Each time you turn
on the nüvi, enter the PIN or drive to the
security location.
1. Touch
Tools
>
Settings
>
Security
.
2. Touch the button below
Garmin
Lock
.
3. Enter a 4-digit
PIN and drive to a
security location.
•
•
•
•
What is a Security Location?
Your security location should be a
location you return to often, such as your
home. If the nüvi has satellite signals
and you are at the security location, you
do not need to enter the PIN.
NOTe:
If you forget your PIN and
your security location, you must send
your nüvi to Garmin to get it unlocked.
You must also send a valid product
registration or proof of purchase.
Calibrating the Screen
If the touch screen is not responding
properly, calibrate the touch screen.
Slide the
Power
key to the left and hold
it for 8 seconds. Release the
Power
key, and press your finger to the screen.
Hold your finger on the screen for about
30 seconds until the calibration screen
appears (white screen with “Press dot”).
