Adjusting the Volume
Enabling and Disabling Zones
If you have wired your vessel's speakers into zones, you can
enable needed zones and disable unused zones.
1
From the media screen, select
Menu
>
Media Menu
>
Audio Levels
>
Enable/Disable Zones
.
2
Select a zone.
Muting the Media Volume
1
From the media screen, select
.
2
If necessary, select
Select
.
Scanning VHF Channels
Before you can scan VHF channels, you must set the source to
VHF.
You can monitor VHF channels saved as presets for activity and
automatically switch to an active channel.
From the VHF media screen, select
Scan
.
Adjusting the VHF Squelch
NOTE:
Your media player must support VHF radio to use this
feature.
1
From the VHF source page, select
Menu
>
Media Menu
>
Squelch
.
2
Use the slider bar to adjust the VHF squelch.
SiriusXM® Satellite Radio
When you have a Garmin Meteor 300 and SiriusXM Connect
Tuner installed and connected to the chartplotter, you may have
access to SiriusXM satellite radio, depending on your
subscription.
Locating a SiriusXM Radio ID
Before you can activate your SiriusXM subscription, you must
have the radio ID of your SiriusXM Connect Tuner.
You can locate the SiriusXM Radio ID on the back of the
SiriusXM Connect Tuner, on the back of its packaging, or by
tuning your chartplotter to channel 0.
1
Select an option:
• Select
Media
>
Source
>
SiriusXM
.
• Select
Settings
>
System
>
System Information
.
2
If necessary, tune to channel 0 or 1.
The SiriusXM radio ID does not include the letters I, O, S, or
F.
Activating a SiriusXM Subscription
When the SiriusXM tuner is properly installed and turned on,
you can hear a preview channel on SiriusXM channel 0 or 1.
1
Contact SiriusXM listener care by phone at (866) 635-2349
or go to
to subscribe in the
United States. Contact SiriusXM by phone at (877) 438-9677
or go to
to subscribe in Canada.
2
Provide the necessary information to the SiriusXM
representative or on the web site to activate your SiriusXM
Connect Tuner.
Subscription Updated
appears on the chartplotter display
when it is in SiriusXM mode and the tuner has received the
activation message.
3
If the service is not activated within the hour, go to
or contact SiriusXM by phone at
1-855-MYREFRESH (697-3373).
NOTE:
For the SiriusXM Connect Tuner to receive the
activation message, it must be powered on and receiving the
SiriusXM signal.
Customizing the Channel Guide
SiriusXM radio channels are grouped in categories. You can
select the category of channels that appear in the channel
guide.
1
Select
Media
>
Category
.
2
Select a category.
Saving a SiriusXM Channel to the Presets List
You can save your favorite channels to the presets list.
1
Select
Media
.
2
Select the channel you want to save as a preset.
3
Select
Menu
>
Presets
>
Add Current Channel
.
Adjusting SiriusXM Satellite Radio Volume
1
Select
Media
>
Menu
.
2
Select or .
Unlocking SiriusXM Parental Controls
1
From the media screen, select
Browse
>
Parental
>
Unlock
.
2
Enter your passcode.
The default passcode is 0000.
Setting Parental Controls on SiriusXM Radio Channels
Before you can set parental controls, the parental controls must
be unlocked.
The parental control feature allows you to limit access to any
SiriusXM channels, including those with mature content. When
enabled, the parental control feature requires you to enter a
passcode to tune to the locked channels.
Select
Browse
>
Parental
>
Lock/Unlock
.
A list of channels appears. A checkmark indicates a locked
channel.
NOTE:
When you view the channels after setting parental
controls, the display changes:
•
indicates a locked channel.
•
indicates an unlocked channel.
Changing a Parental Passcode on a SiriusXM Radio
Before you can change the passcode, the parental controls
must be unlocked.
1
From the media screen, select
Browse
>
Parental
>
Change Pin
.
2
Enter your passcode and select
Done
.
3
Enter a new passcode.
4
Confirm the new passcode.
Restoring Default Parental Control Settings Values
This process deletes all the settings information you have
entered. When you restore the parental control settings to their
default values, the passcode value is reset to 0000.
1
From the media menu, select
Installation
>
Factory
Defaults
.
2
Select
Yes
.
Clearing All Locked Channels on a SiriusXM Radio
Before you can clear all locked channels, the parental controls
must be unlocked.
1
From the media screen, select
Browse
>
Parental
>
Clear
All Locked
.
2
Enter your passcode.
Setting the Device Name
1
From the media screen, select
Menu
>
Media Menu
>
Installation
>
Set Device Name
.
2
Enter a device name.
28
Media Player
