Chart Menu
NOTE: Not all settings apply to all charts. Some options require premium maps or connected accessories, such
as radar.
NOTE: The menus may contain some settings that are not supported by your installed charts or your present
location. If you make changes to those settings, the changes will not impact the chart view.
From a chart, select Menu.
Layers: Adjusts the appearance of the different items on the charts (
).
Quickdraw Contours: Turns on bottom contour drawing, and allows you to create fishing map labels (
Quickdraw Contours Mapping, page 39
).
Settings: Adjusts the chart settings (
).
Edit Overlays: Adjusts the data shown on the screen (
Customizing the Data Overlays, page 15
).
Chart Layers
You can turn on and off chart layers and customize features of the charts. Each setting is specific to the chart
or chart view being used.
NOTE: Not all settings apply to all charts and chartplotter models. Some options require premium maps or
connected accessories.
NOTE: The menus may contain some settings that are not supported by your installed charts or your present
location. If you make changes to those settings, the changes will not impact the chart view.
From a chart, select Menu > Layers.
Chart: Shows and hides chart-related items (
).
My Vessel: Shows and hides items relating to the boat (
My Vessel Layer Settings, page 35
).
User Data: Shows and hides user data, such as waypoints, boundaries, and tracks, and opens user data lists
(
User Data Layer Settings, page 36
).
Other Vessels: Adjusts how other vessels are shown (
Other Vessels Layer Settings, page 36
).
Water: Shows and hides depth items (
).
Quickdraw Contours: Shows and hides Garmin Quickdraw Contours data (
Garmin Quickdraw Contours Settings,
).
Weather: Shows and hides weather-related items (
Weather Layer Settings, page 38
).
Chart Layer Settings
From a chart, select Menu > Layers > Chart.
Satellite Photos: Shows high-resolution satellite images on the land or on both land and sea portions of the
Navigation chart, when certain premium maps are used (
Showing Satellite Imagery on the Navigation Chart,
).
NOTE: This setting must be enabled to view Standard Mapping charts.
Tides & Currents: Shows current station indicators and tide station indicators on the chart (
) and enables the tides and current slider, which sets the time for which tides and
currents are reported on the map.
Land POIs: Shows points of interest on land.
Navaid: Shows navigational aids, such as ATONs and flashing lights, on the chart. Allows you to select NOAA or
IALA navaid type.
Service Points: Shows locations for marine services.
Depth: Adjusts the items on the depth layer (
).
Restricted Areas: Shows information about restricted areas on the chart.
Photo Points: Shows camera icons for aerial photos (
Viewing Aerial Photos of Landmarks, page 29
).
34
Charts and 3D Chart Views
