background image

Measuring Distance on the Sonar 

Screen................................................ 73

Panoptix Sonar Views........................... 73

LiveVü Down Sonar View.................. 74
LiveVü Forward Sonar View.............. 75
RealVü 3D Forward Sonar View........76
RealVü 3D Down Sonar View............ 77
RealVü 3D Historical Sonar View..... 78
FrontVü Sonar View.......................... 79

LiveScope Sonar View.......................... 79
Perspective View................................... 80
Selecting the Transducer Type............ 80
Selecting a Sonar Source..................... 80

Renaming a Sonar Source................ 81

Creating a Waypoint on the Sonar 

Screen.................................................... 81
Pausing the Sonar Display.................... 81
Viewing Sonar History.......................... 81
Sonar Sharing........................................ 81
Zooming in a Panoptix LiveVü or 

LiveScope Sonar View.......................... 82
Adjusting the Level of Detail.................82
Adjusting the Color Intensity................ 83
Sonar Setup........................................... 83

Setting the Zoom Level on the Sonar 

Screen................................................ 84
Setting the Scroll Speed.................... 84
Adjusting the Range.......................... 84
Sonar Noise Rejection Settings........ 85
Sonar Appearance Settings.............. 85
Sonar Alarms..................................... 86
Advanced Sonar Settings................. 87
Transducer Installation Settings...... 87
Sonar Frequencies............................ 88
Turning On the A-Scope.................... 89

Panoptix Sonar Setup........................... 89

Adjusting the RealVü Viewing Angle 

and Zoom Level................................. 89
Adjusting the RealVü Sweep 

Speed................................................. 89
LiveVü Forward and FrontVü Sonar 

Settings.............................................. 90
RealVü Appearance Settings............ 92
Panoptix Transducer Installation 

Settings.............................................. 92

LiveScope and Perspective Sonar 

Settings.................................................. 94

LiveScope and Perspective Sonar 

Setup.................................................. 94
LiveScope and Perspective 

Appearance Settings......................... 95
LiveScope and Perspective Layout 

Settings.............................................. 95
LiveScope and Perspective 

Transducer Installation Settings...... 95

Radar............................................. 96

Radar Interpretation.............................. 96

Radar Overlay.................................... 96
Radar Overlay and Chart Data 

Alignment...........................................97

Transmitting Radar Signals.................. 97

Stopping the Transmission of Radar 

Signals............................................... 97
Setting Up the Timed Transmit 

Mode.................................................. 97
Enabling and Adjusting a Radar No 

Transmit Zone................................... 97

Adjusting the Radar Range................... 98

Tips for Selecting a Radar Range..... 98

MotionScope™ Doppler 

Radar Technology................................. 98
Enabling a Guard Zone......................... 98

Defining a Circular Guard Zone........ 99
Defining a Partial Guard Zone.......... 99

MARPA................................................... 99

MARPA Targeting Symbols............ 100
Acquiring MARPA Targets 

Automatically.................................. 100
Removing MARPA Targets 

Automatically.................................. 100
Assigning a MARPA Tag to an 

Object............................................... 100
Removing a MARPA Tag from a 

Targeted Object............................... 100
Viewing Information about a MARPA-

tagged Object.................................. 100
Viewing a List of AIS and MARPA 

Threats............................................. 101
Showing AIS Vessels on the Radar 

Screen.............................................. 101
VRM and EBL................................... 101

Echo Trails........................................... 102

Turning on Echo Trails.................... 102

iv

Table of Contents

Summary of Contents for GPSMAP 86 Series



























































































































































































































Reviews: