background image

Laylines Settings

To use the laylines features, you must connect a wind sensor to the chartplotter.
When in sailing mode (

Setting the Vessel Type for Sailing Features, page 64

), you can display laylines on the 

navigation chart. Laylines can be very helpful when racing.

From the Navigation chart, select Options > Layers > My Vessel > Laylines > Setup.
Sailing Ang.: Allows you to select how the device calculates laylines. The Actual option calculates the laylines 

using the measured wind angle from the wind sensor. The Manual option calculates the laylines using 
manually entered windward and leeward angles. The Polar Table option calculates the laylines based on the 
imported polar table data (

Importing a Polar Table Manually, page 67

).

Windward Ang.: Allows you to set a layline based on the windward sailing angle.
Leeward Ang.: Allows you to set a layline based on the leeward sailing angle.
Tide Correction: Corrects the laylines based on the tide.
Layline Filter: Filters the layline data based on the time interval entered. For a smoother layline that filters out 

some of the changes in the boat's heading or true wind angle, enter a higher number. For laylines that display 
a higher sensitivity to changes in the boat's heading or true wind angle, enter a lower number.

Polar Tables

 WARNING

This feature allows you to load and use data from a third party. Garmin makes no representations about the 
accuracy, reliability, completeness or timeliness of the data generated by third parties. Any use or reliance on 

data generated by third parties is at your own risk.

You can use polar table data with your chartplotter. You can assign polar data types in data fields, and you can 

use polar data to calculate optimal laylines and starting line guidance.

66

Sailing Features

Summary of Contents for GPSMAP 9 3 Series































































































































































































































Reviews: