31
Main Pages
Active Route Page
Select ‘Remove Waypoint’ to remove the highlighted waypoint
from the Active Route.
With a waypoint on the Active Route Page highlighted, press
ENTER
to view waypoint information or press
DIRECT TO
,
then
ENTER
to skip ahead to the waypoint.
To review database information for a waypoint in the active route:
1. With the Active Route Page displayed, use the
ARROW KEYPAD
to highlight any listed waypoint
and press
ENTER
.
2. The waypoint information pages will appear. For airports, use the
ARROW KEYPAD
to highlight the
‘AVIATION’, ‘RUNWAY’, ‘COMM’ or ‘APPROACH’ fi le tabs, as desired.
3. To return to the Active Route Page, press
QUIT
.
To edit the active route:
1. With the Active Route Page displayed, use the
ARROW KEYPAD
to highlight the route waypoint you
wish to remove—or the waypoint in front of which you will insert a new route waypoint—and press
MENU
to display the Active Route Page Options.
2. To insert a new waypoint in front of the selected waypoint: Use the
ARROW KEYPAD
to highlight
‘Insert Waypoint’ and press
ENTER
to display the waypoint information pages. Select the identifi er,
facility name or city name fi eld (as appropriate) and press
ENTER
. Use the
ARROW KEYPAD
to
select the new waypoint—UP/DOWN to select the highlighted character and RIGHT to move to the
next character fi eld—and press
ENTER
once all characters for the new waypoint have been entered.
With the on-screen ‘OK’ button highlighted, press
ENTER
.
3. To remove the selected route waypoint: Highlight ‘Remove Waypoint’ and press
ENTER
.
To skip ahead and bypass a waypoint(s) in the active route:
1. With the Active Route Page displayed, use the
ARROW KEYPAD
to highlight the new destination
waypoint.
2. Press
DIRECT TO
, then
ENTER
to set a course directly to the designated waypoint. OR,
2. Press
DIRECT TO
twice to activate the route leg to the designated waypoint. Select ‘Yes’ in the pop-
up window and press
ENTER
.
Selecting an active route waypoint as a ‘GOTO’ destination is referred to as an
“on route GOTO”. Once you reach the GOTO destination, the GPSMAP 196 will automati-
cally revert back to the active route and navigate to any remaining waypoints which occur
in the route after the selected GOTO destination. (This differs from an “off route GOTO”
where there are no additional waypoints available once the GOTO destination is reached.)
)
190-00283-00Backup.indd 31
12/8/2002, 8:09:05 PM
Summary of Contents for GPSMAP GPSMAP 196
Page 1: ...Pilot s Guide Reference GPSMAP 196 196PG Covers indd 1 12 9 2002 4 34 25 PM...
Page 18: ...8 Basic Operation This page intentionally blank 190 00283 00Backup indd 8 12 8 2002 8 08 50 PM...
Page 121: ...190 00283 00Backup indd 111 12 8 2002 8 10 01 PM...
Page 122: ...190 00283 00Backup indd 112 12 8 2002 8 10 01 PM...
