background image

3

190-01007-09  Rev. A

Garmin GTN Pilot’s Guide Errata 1

the Flight Plan or Procedures portion of the system. The absence of a particular 
Departure, Arrival, or Approach under the Flight Plan or Procedures portion of 
the system does not preclude the ability to view the Chart for that procedure 
under the Chart feature. 

The following list on chart loading priority was added on page 7-2: 
The  following  list  describes  the  order  in  priority  in  which  charts  are  auto-loaded  in  the 

system when the Chart page is displayed: 

1.  The most-recently selected chart during the current power cycle, if valid*, 

2.   The  airport  surface  chart  for  the  nearest  airport,  if  on  ground  and  nearest  airport  is 

found, 

3.   The approach chart for the approach in the active flight plan, if an approach exists in the 

flight plan, 

4.   The airport surface chart for the last airport in the flight plan, if one exists, 

5.   The airport surface chart for the nearest airport, if nearest airport is found (same as #2 

but aircraft could be in-air), 

6.   The airport surface chart for the first airport in the database, if found, 

7.   No chart. 

* “Selected” does not include charts that were auto-selected. A selection must be made 

while on the charts page. 

There following actions will invalidate #1: 

•  Changing the approach in the active flight plan
•  Changing the on-ground status while not viewing the Charts page

Messages

Page

Message

Description

Action

17-2

AUDIO PANEL -   

Audio panel is 
inoperative or 
connection to GTN 
is lost. 

The GTN is configured for 
Garmin audio panel control 
(GMA 35) and the GTN 
cannot communicate with 
the GMA 35. No control 
of the GMA 35 will be 
possible. 

Remove power from the GMA 
35 audio panel by pulling 
the circuit breaker labeled 
“Audio.” The pilot will be able 
to communicate with the Com 
2 radio. Contact dealer for 
service. 

17-4

CONFIGURATION 

Terrain/TAWS 

configuration is invalid. 
GTN needs service. 

TAWS is inoperative due 
to a configuration problem 
with the GTN. This message 
will be accompanied by a 
TER FAIL annunciation. 

Contact dealer for service. 

190-01007-09_0A.indd   3

3/1/2011   2:21:13 PM

Reviews: