5-10
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Direct-To
Selected
Initial Wpt
Touch to Select
Initial Track
Touch to Select SAR Pattern Type
Touch to Select
Initial Turn
Direction
Touch to Select
Track Spacing
Distance
Touch to Select
Number of Legs
Touch to Preview
Selected Pattern
Touch to Select Leg Length
Touch to Load Selected SAR Pattern to Direct-To
Figure 5-15 Direct-To Search and Rescue Pattern Page
Figure 5-16 Direct-To Search and Rescue Preview
3. Touch the
SAR Pattern
key to select between Parallel Track,
Sector Search, Expanding Square, or Orbit for the SAR pattern
type. The available patterns can be configured by the installer
and all of the listed pattern types may not be available. Refer to
section 4.2.4 for more details on configuring each pattern type.
4. Touch the
Preview
key to open a preview of the selected
pattern.
5. Confirm the SAR pattern information and then touch the
Load
Pattern
key to accept the SAR parameters and return to the
Direct-To page.
Direct-To Wpt
Specified Course
to Direct-To Wpt
Selected SAR
Pattern Type
Touch to Activate
Direct-To Course
and SAR Pattern
Figure 5-17 Direct-To Page with SAR Pattern Selected
6. Touch the
SAR Activate
key or press the
small right
knob
to activate the selection.
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...
