9-32
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Traffic
En Route, Standard, or Terminal Shield Type
1. While viewing the TCAD Control menu, touch the
Shield Type
key and touch the desired Shield Type: Enroute, Standard, or
Terminal.
Touch to Shield Range
Touch to Manually
Set Shield Height
Touch to Select
Shield Type:
Approach or
Standard
Figure 9-29 TCAD 9900B Shield Setup for En Route, Standard, and Terminal
2. Touch the
Shield Height
key and use the keypad to select
the Shield Height value. The selected value will be shown in
the
Shield Range
key.
3. Touch the
Shield Range
key and use the keypad to select
the Shield Range value. The selected value will be shown in
the
Shield Range
key.
9.7.3.3
Approach Mode
1. While viewing the TCAD Control menu, touch the
Approach
key to activate Approach Mode TCAD traffic.
2. Touching the
Approach
key toggles Approach Mode between
Set, Armed, or Active.
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...
