15-18
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
System
3. Touch the
ILS CDI Capture
key to select Auto Switch or Manual
Selection. This feature enables the unit to automatically switch
from GPS to VLOC on an ILS approach. Refer to
Procedures-ILS
Approaches for more detail on ILS approaches.
NOTE:
The ILS CDI Capture key may be disabled in certain GTN installations.
15.4.2 Date/Time
The Date/Time setting provides selection of time format (local or UTC;
12- or 24-hour). UTC (also called “GMT” or “Zulu”) date and time are calculated
directly from the GPS satellites’ signals and cannot be changed.
Current Selected
Date and Time
Touch to Select
Local Time Offset
Touch to Select
Time Format
Figure 15-23 System Date and Time Setup
1. While viewing the System Setup page, touch the
Date/Time
key.
2. While viewing the System Setup page, touch
Local Offset
to
set the time offset for local time.
3. Use the keypad to select the desired local offset and then
touch
Enter
.
4. While viewing the System Setup page, touch the
Time Format
key to select local 12 hour, local 24 hour, or UTC time.
Touch Key to Select
Time Format
Figure 15-24 Select System Time Format
5. Touch the key for the desired time format.
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...
