System Maintenance Manual GTN 6XX/7XX Part 23 AML STC
190-01007-A1
Page 3-4
Rev. 5
7. Ensure that the correct drive is selected. Click
Next
to create the card. Click
Next
to acknowledge
any warnings that appear. The progress window in Figure 3-6 will appear when the card is being
created.
Figure 3-6. Update Progress Window
8. After the card has been created, the window shown in Figure 3-7 in will appear. Click
Finish
to
complete the update process.
Figure 3-7. Update Completion
9. Eject the card from the card reader (or stop the card reader in Windows). The GTN Software
Loader Card is now ready to use.
