15-12
Garmin GTN 725/750 Pilot’s Guide
190-01007-03 Rev. B
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
4. Touch the
Arrival Time
key and select the local time of
expected arrival at the selected waypoint.
5. When the Waypoint, Arrival Date, and Arrival Time values have
been entered, touch the
Compute RAIM
key to determine if
RAIM is available.
RAIM Prediction
Result
Touch To
Compute RAIM
Figure 15-13 RAIM Prediction Completed
15.4
Trip Planning
The GTN 7XX allows the pilot to view desired track (DTK), distance (DIS),
estimated time en route (ETE), en route safe altitude (ESA) and estimated time of
arrival (ETA) information for a direct-to, point-to-point between two specified
waypoints or for any programmed flight plan. This item also displays the sunrise/
sunset times for your destination waypoint (for the selected departure date). All
times are based on the time set in System-Setup. The trip planning inputs are
manually entered by the pilot.
The trip statistics are calculated based on the selected starting and ending
waypoints and the trip planning inputs.
In Flight Plan mode with a stored flight plan selected, and the entire flight
plan (CUM) selected, the waypoints are the starting and ending waypoints of the
selected flight plan.
In Flight Plan mode with a stored flight plan selected, and a specific leg
selected, the waypoints are the endpoints of the selected leg.
Summary of Contents for GTN 750
Page 417: ......
