16-19
190-01007-03 Rev. Q
GTN 725/750 Pilot’s Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
16.4.3 Nearest Airport Criteria
Nearest Airport Criteria defines the surface type and minimum runway
length used when determining the 25 nearest airports to display on the Nearest
Airport Page. A minimum runway length and/or surface type may be entered
to prevent the display of airports with small runways, or runways that do not
have an appropriate surface. Deselecting
Include User Airports
excludes
user-defined airports from the nearest airport search.
Default settings are “0 feet (or meters)” for runway length and “any” for
runway surface type.
1. While viewing the System Setup page, touch the
Nearest Airport
key.
Touch To Select
Runway Surface Type
Touch To Select Minimum
Runway Length
Touch To Include
User Airports
Figure 16-22 Select Nearest Airport Criteria
2. Touch
Runway Surface
to display the options.
Select the desired surface type.
Touch to Select Any
Runway Surface
Touch to Select Hard
Runway Surfaces Only
Touch to Select Hard or
Soft Runway Surfaces
Touch to Select Water
Surfaces Only
Figure 16-23 Nearest Airport Runway Surface Type
3. Touch
Minimum Runway Length
to display the keypad
for selecting the minimum runway length. Select the desired
minimum runway length with the numeric keypad. A selection
of "0" will allow any length.