190-01499-10
GTX 35R/45R Installation Manual (Non-Certified Aircraft)
Rev. 1
Page 3-6
3.9
GTX Pressure Altitude Input
In most installations, the GTX 35R/45R receives pressure altitude data from the G3X system. An optional
GAE sensor module is available for installations requiring pressure altitude data that meets the
requirements of TSO-C88b. When a GAE is installed and configured, the GTX 45R/45R will prioritize
pressure altitude from by the GAE over altitude data from the G3X system. Configuration and calibration
of the GAE requires the use of the dealer-only software tool described in Section 6.4.
3.10
ADS-B In Considerations (GTX 45R Only)
The GTX 45R provides ADS-B In data regardless of the state of the transponder. HSDB ADS-B In
displays cannot connect to more than one ADS-B In source.
NOTE
Do not install with a GDL 88.
3.11
Bluetooth Considerations (GTX 45R Only)
For optimal connectivity with a GTX 45, the Bluetooth antenna must point towards the passenger area of
the aircraft. This is identifiable by the Garmin logo sticker. Bluetooth performance may be limited by
aircraft obstructions.
Table 3-5 Pressure Altitude Setting Source Priority
Priority
Source
1
GAE altitude encoder module (if installed)
2
G3X ADAHRS