To set the tracking interval, press the Power/Enter button and select the Settings icon, then tracking and select “Moving
Interval”’ and choose the tracking period, normally 30 minutes.
Units and times zones are also selected through the Settings menu. These should be set to nautical miles/feet and UTC
+10 with daylight enabled
On the Tracking screen, you will be able to monitor the number of waypoints sent, the time tracking began, and the
most recent time a waypoint was sent. At any time, you can turn off tracking by selecting End Tracking and pressing
Power/Enter button.
Settings
From the home screen, use the directional pad to select “Settings”. Once there, scroll down to set the various options.
After selecting the particular option, press the Power/Enter button to enable it
•
Display- 50%
•
Tracking- moving interval 30 minutes, Extended Tracking should be off
•
Bluetooth should be off to maximise battery life
•
Time; UTC plus 10, Daylight saving enabled if appropriate.
•
Units- Nautical miles/metres
Messaging
You can use the messaging interface of your Bluetooth enabled tablet or smartphone to send messages through the
inReach SE tracker. The tracker needs first to be paired with your smartphone/tablet.
For Android Devices
•
Turn on the inReach SE
•
From the home page select Settings and press the Power/Enter button on the inReach.
•
Select Bluetooth and press the Power/Enter button.
•
Select Pair inReach and press the Power/Enter button.
•
On the Android device, open Settings.
•
Tap Bluetooth.
•
If Bluetooth is not currently turned on, tap the OFF slider to enable it.
•
On the inReach, press the Power/Enter button.
•
Tap on the inReach device in the list of Bluetooth devices on the Android device. The inReach and Android
device will now connect to each other.
•
Press the home button to return to the home page of the Android device. Launch the Earthmate app .
•
Note: The Earthmate app is a free download from the Google Play Store.
•
The bottom right-hand corner of the application will show inReach Connected.
•
Note: If inReach Connected does not appear on the bottom right-hand corncer of the app tap the menu button
at the top of the app and select Connect.
For IOS Devices
•
Turn on the inReach SE.
•
From the home page select Settings and press the Power/Enter button on the inReach
•
Select Bluetooth and press the Power/Enter button.
•
Select Pair inReach and press the Power/Ente button.
•
On the iOS device, tap Settings.
•
Tap Bluetooth.
•
If Bluetooth is not currently turned on, tap the OFF slider to enable it.
