Garmin IPH-A3095, Owner'S Manual

Customizing the Watch Face

Before you can activate a Connect IQ watch face, you must 

install a watch face from the Connect IQ store (

Connect IQ 

Features

, page 23

).

You can customize the watch face information and appearance, 

or activate an installed Connect IQ watch face.

1

From the watch face, hold 

UP

.

2

Select 

Watch Face

.

3

Select 

UP

 or 

DOWN

 to preview the watch face options.

4

Select 

Add New

 to scroll through additional pre-loaded watch 

faces.

5

Select   > 

Apply

 to activate a pre-loaded watch face or an 

installed Connect IQ watch face.

6

If using a pre-loaded watch face, select   > 

Customize

.

7

Select an option:
• To change the style of the numbers for the analog watch 

face, select 

Dial

.

• To change the style of the hands for the analog watch 

face, select 

Hands

.

• To change the style of the numbers for the digital watch 

face, select 

Layout

• To change the style of the seconds for the digital watch 

face, select 

Seconds

.

• To change the data that appears on the watch face, select 

Data

.

• To add or change an accent color for the watch face, 

select 

Accent Color

.

• To change the background color, select 

Bkgd. Color

.

• To save the changes, select 

Done

.

Sensors Settings

Compass Settings

Hold 

UP

, and select 

Settings

 > 

Sensors & Accessories

 > 

Compass

.

Calibrate

: Allows you to manually calibrate the compass sensor 

(

Calibrating the Compass Manually

, page 27

).

Display

: Sets the directional heading on the compass to letters, 

degrees, or milli-radians.

North Ref.

: Sets the north reference of the compass (

Setting the 

North Reference

, page 27

).

Mode

: Sets the compass to use electronic-sensor data only 

(On), a combination of GPS and electronic-sensor data when 

moving (Auto), or GPS data only (Off).

Calibrating the Compass Manually

NOTICE

Calibrate the electronic compass outdoors. To improve heading 

accuracy, do not stand near objects that influence magnetic 

fields, such as vehicles, buildings, and overhead power lines.
Your device was already calibrated at the factory, and the 

device uses automatic calibration by default. If you experience 

irregular compass behavior, for example, after moving long 

distances or after extreme temperature changes, you can 

manually calibrate the compass.

1

Hold 

UP

.

2

Select 

Settings

 > 

Sensors & Accessories

 > 

Compass

 > 

Calibrate

 > 

Start

.

3

Follow the on-screen instructions.

TIP: 

Move your wrist in a small figure eight motion until a 

message appears.

Setting the North Reference

You can set the directional reference used in calculating 

heading information.

1

Hold 

UP

.

2

Select 

Settings

 > 

Sensors & Accessories

 > 

Compass

 > 

North Ref.

.

3

Select an option:
• To set geographic north as the heading reference, select 

True

.

• To set the magnetic declination for your location 

automatically, select 

Magnetic

.

• To set grid north (000º) as the heading reference, select 

Grid

.

• To set the magnetic variation value manually, select 

User

, 

enter the magnetic variance, and select 

Done

.

Altimeter Settings

Hold 

UP

, and select 

Settings

 > 

Sensors & Accessories

 > 

Altimeter

.

Calibrate

: Allows you to manually calibrate the altimeter sensor.

Auto Cal.

: Allows the altimeter to self-calibrate each time you 

turn on GPS tracking.

Elevation

: Sets the units of measure for elevation.

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the 

device uses automatic calibration at your GPS starting point by 

default. You can manually calibrate the barometric altimeter if 

you know the correct elevation.

1

Hold 

UP

.

2

Select 

Settings

 > 

Sensors & Accessories

 > 

Altimeter

.

3

Select an option:
• To calibrate automatically from your GPS starting point, 

select 

Auto Cal.

 > 

On

.

• To enter the current elevation, select 

Calibrate

.

Barometer Settings

Hold 

UP

, and select 

Settings

 > 

Sensors & Accessories

 > 

Barometer

.

Plot

: Sets the time scale for the chart in the barometer widget.

Storm Alert

: Sets the rate of barometric pressure change that 

triggers a storm alert.

Watch Mode

: Sets the sensor used in watch mode. The Auto 

option uses both the altimeter and barometer according to 

your movement. You can use the Altimeter option when your 

activity involves changes in altitude, or the Barometer option 

when your activity does not involve changes in altitude.

Pressure

: Sets how the device displays pressure data.

Map Settings

You can customize how the map appears in the map app and 

data screens.
Hold 

UP

, and select 

Settings

 > 

Map

.

Orientation

: Sets the orientation of the map. The North Up 

option shows north at the top of the screen. The Track Up 

option shows your current direction of travel at the top of the 

screen.

User Locations

: Shows or hides saved locations on the map.

Auto Zoom

: Automatically selects the zoom level for optimal 

use of your map. When disabled, you must zoom in or out 

manually.

Lock on Road

: Locks the position icon, which represents your 

position on the map, onto the nearest road.

Track Log

: Shows or hides the track log, or the path you have 

traveled, as a colored line on the map.

Customizing Your Device

27