Creating and Navigating to Waypoints
To create a waypoint from the map:
1. From QueMap, press the
Rocker
key in any
direction to activate Pan Mode. An arrow
appears on the map.
2. Continue to press the
Rocker
key until the
arrow points to the place you want to save as
a waypoint.
3. Press
ENTER
. An Information screen appears.
Highlight
Create Waypoint
and press
ENTER
.
4. Use the
Rocker
and
ENTER
keys to name the
waypoint.
5. Highlight
OK
and press
ENTER
.
TIP:
To create a waypoint inside airspace, use the stylus to tap the
Waypoint icon on the map page.
To go to a waypoint or recent point:
1. Press the
Direct To
D
key.
2. Press the
Rocker
key Down to highlight the
Aviation
pick-list. Press
ENTER
.
3. Highlight
Recent
or
Waypoints
and press
ENTER
.
4. Highlight the point you want to go to. Then
press the
Rocker
key Right to highlight
Go To
and press
ENTER
.
Viewing Details/Changing Modes
To view details for an airport:
1. Press the
NEAREST
key or
Direct To
D
key on the aviation cradle.
2. Highlight the airport you want to view
details for and press
ENTER
.
3. To view Comm, Runway, Approach, or VOR
details, highlight that information type in
the list and press
ENTER
.
To change between Aviation and
Automotive modes manually:
1. From QueMap, press the
MENU
key and
select
Switch Usage Mode
.
OR:
1. From QueMap, press the
MENU
key and
select
Preferences
.
2. From the pick-list in the top left corner,
select
Usage Mode
.
3. Select
Automotive
from the Navigation
Mode pick-list.
TIP:
If
Auto Select
is checked in Preferences, the iQue 3600a
automatically switches to Automotive mode when you insert the unit
into an automotive cradle or Aviation mode in the Aviation cradle—no
need to switch back and forth manually.
Selecting an Approach
To select an approach for your
destination airport:
1. While you have an active flight plan (or Direct
To), press the
Que
button until you see the
Active Route page.
2. Press the
MENU
key.
3. Highlight
Select Approach
and press
ENTER
.
4. Highlight the Approaches pick-list and press
ENTER
. A list of approaches appears.
5. Highlight an approach from the list and press
ENTER
. Then highlight
Select
and press
ENTER
.
6. Highlight
No
and press
ENTER
if you want
to proceed directly to the final approach fix.
Select
Yes
if you want to activate vectors.
NOTE:
If you select
Yes
to activate vectors, you will not see any active
navigation until you are on your final approach.
To cancel an active approach:
1. Press the
Que
key until you see the Active
Route page.
2. Highlight
Remove Appr
and press
ENTER
.
Using Flight Plans
Once you create a flight plan, it is saved automatically in the Saved Routes
list. The iQue 3600a names the flight plan using its starting and ending points
(example: “KIXD-KSLN”). You can activate this flight plan at any time from the
QueRoutes page.
To activate a saved flight plan:
1. Press
ESCAPE
until you see the Applications
Launcher page. Continue to press
ESCAPE
until
you see
Que
in the pick-list at the top right
corner of the page.
2. Highlight
Routes
and press
ENTER
.
3. Highlight
Saved Routes
and press
ENTER
.
4. Highlight the route you want to activate and
press
ENTER
.
5. Highlight
Activate
and press
ENTER
.
To stop navigating a flight plan:
1. With an active flight plan, press the
Que
button
until you see the Active Route page.
2. Press the
MENU
key.
3. Highlight
Deactivate
and press
ENTER
.
Choose Select Approach from the menu.
Select an approach from the list.
Highlight the type of
information you want to view
in the list and press
ENTER
.
