Using Bluetooth: Creating a New Connection in Wizard Mode
54
Chapter 8: Using Bluetooth
Setting a PIN Code
You can set a PIN code for your iQue M5 to ensure that all Bluetooth connections are secure. Anyone who tries to pair with your
iQue M5 must enter the correct PIN code to establish a connection.
To set a PIN code for incoming connections:
1. In Wizard mode or Standard mode, tap
Tools
and then
Settings
.
2. Tap the
Security
tab.
3. Check the box nect to
Use PIN Code (Incoming Connections)
. Then tap the
PIN Code
field and enter a PIN code.
4. If you want to encrypt outgoing connections (connections you originate), check the box next to
Encrypt Link on All
Outgoing Connections
.
5. Tap
OK
.
Connecting to ActiveSync
®
with Bluetooth
You can set up a Bluetooth connection between your iQue M5 and your Bluetooth-enabled personal computer to synchronize
wirelessly—no Sync cradle needed. To synchronize wirelessly with your personal computer, you must have already set up a
Partnership between your iQue M5 and your personal computer, and you must have already synchronized using your Sync cradle.
Your personal computer must also offer a Bluetooth Serial Port as a connection service.
To set up ActiveSync for Bluetooth synchronization:
1. Make sure your iQue M5 is not currently connected to your personal computer.
2. Make sure your personal computer offers a Serial Port Bluetooth service. Then determine what serial port the ser-
vice is set to use (for help, refer to the Owner’s Manual for your personal computer or Bluetooth device).
2. Open
ActiveSync
on your computer.
3. Click
File
and then
Connection Settings
.
4. Check the box next to “Allow serial cable or infrared connection to this COM port.” Then choose the COM port used
by your personal computer’s Bluetooth service (see Step 2).
5. Click
OK
.
To set up a Bluetooth ActiveSync connection:
1. On your iQue M5, open BTExplorer and then tap the
New Connection
icon
.
2. Choose “ActiveSync via Bluetooth” from the drop-down menu. Then tap
Next
.
3. Choose your personal computer from the list of devices and then tap
Next
.
4. BTExplorer automatically selects the appropriate service. If a list of services appears for a device, choose
Blue-
tooth Serial Port
and then tap
Next
.
5. If you want to rename the favorite, tap the
Favorite Name
field and enter a new name. Then tap
Next
.
6. Tap
Connect
. Your iQue M5 should automatically begin synchronizing with your computer.
