background image

1

From a chart or a 3D chart view, select 

Menu

 > 

Chart Menu 

Other Vessels

 > 

Display Setup

.

2

Select an option:
• To indicate the distance from your location in which AIS 

vessels appear, select 

Display Range

, and select a 

distance.

• To show MARPA-tagged vessels, select 

MARPA

 > 

Show

.

• To show details about AIS-activated and MARPA-tagged 

vessels, select 

Details

 > 

Show

.

• To set the projected heading time for AIS-activated and 

MARPA-tagged vessels, select 

Proj. Heading

, and enter 

the time.

• To show the tracks of AIS vessels, select the length of the 

track that appears using a trail, select 

Trails

, and select 

the length.

Activating a Target for an AIS Vessel

1

From a chart or a 3D chart view, select an AIS vessel.

2

Select 

AIS Vessel

 > 

Activate Target

.

Viewing Information about a Targeted AIS Vessel

You can view the AIS signal status, MMSI, GPS speed, GPS 

heading, and other information that is reported about a targeted 

AIS vessel.

1

From a chart or a 3D chart view, select an AIS vessel.

2

Select 

AIS Vessel

.

Deactivating a Target for an AIS Vessel

1

From a chart or a 3D chart view, select an AIS vessel.

2

Select 

AIS Vessel

 > 

Deactivate

.

Viewing a List of AIS and MARPA Threats

1

From a chart or a 3D chart view, select 

Menu

 > 

Other 

Vessels

 > 

List

 > 

Show

.

2

Select the type of threats to include in the list.

Setting the Safe-Zone Collision Alarm

Before you can set a collision alarm, you must have a 

compatible chartplotter connected to an AIS device or radar.
The safe-zone collision alarm is used only with AIS and MARPA. 

MARPA functionality works with radar. The safe zone is used for 

collision avoidance and can be customized.

1

Select 

Settings

 > 

Alarms

 > 

AIS

 > 

Collision Alarm

 > 

On

.

A message banner appears and an alarm sounds when a 

MARPA-tagged object or an AIS-activated vessel enters the 

safe-zone area around your boat. The object is also labeled 

as dangerous on the screen. When the alarm is off, the 

message banner and audible alarm are disabled, but the 

object is still labeled as dangerous on the screen.

2

Select 

Range

.

3

Select a distance for the safe-zone radius around your 

vessel.

4

Select 

Time To

.

5

Select a time at which the alarm will sound if a target is 

determined to intersect the safe zone.
For example, to be notified of a pending intersection 10 

minutes before it will likely occur, set Time To to 10, and the 

alarm will sound 10 minutes before the vessel intersects the 

safe zone.

AIS Distress Signals

Self-contained AIS distress signal devices transmit emergency 

position reports when activated. The chartplotter can receive 

signals from Search and Rescue Transmitters (SART), 

Emergency Position Indicating Radio Beacons (EPIRB), and 

other man overboard signals. Distress signal transmissions are 

different than standard AIS transmissions, so they appear 

differently on the chartplotter. Instead of tracking a distress 

signal transmission for collision avoidance, you track a distress 

signal transmission to locate and assist a vessel or person.

Navigating to a Distress Signal Transmission

When you receive a distress signal transmission, a distress 

signal alarm appears.

Select 

Review

 > 

Go To

 to begin navigation to the 

transmission.

AIS Distress Signal Device Targeting Symbols

Symbol Description

AIS distress signal device transmission. Select to see more 
information about the transmission and begin navigation.
Transmission lost.

Transmission test. Appears when a vessel initiates a test of 
their distress signal device, and does not represent a true 
emergency.
Transmission test lost.

Enabling AIS Transmission Test Alerts

To avoid a large number of test alerts and symbols in crowded 

areas such as marinas, you can select to receive or ignore AIS 

test messages. To test an AIS emergency device, you must 

enable the chartplotter to receive test alerts.

1

Select 

Settings

 > 

Alarms

 > 

AIS

.

2

Select an option:
• To receive or ignore Emergency Position Indicating Radio 

Beacon (EPRIB) test signals, select 

AIS-EPIRB Test

.

• To receive or ignore Man Overboard (MOB) test signals, 

select 

AIS-MOB Test

.

• To receive or ignore Search and Rescue Transponder 

(SART) test signals, select 

AIS-SART Test

.

Turning Off AIS Reception

AIS signal reception is turned on by default.

Select 

Settings

 > 

Other Vessels

 > 

AIS

 > 

Off

.

All AIS functionality on all charts and 3D chart views is 

disabled. This includes AIS vessel targeting and tracking, 

collision alarms that result from AIS vessel targeting and 

tracking, and the display of information about AIS vessels.

Chart and 3D Chart View Settings

NOTE: 

Not all settings apply to all charts and 3D chart views. 

Some options require premium maps or connected accessories, 

such as radar.
These settings apply to the charts and 3D chart views, except 

the radar overlay and Fish Eye 3D (

Fish Eye 3D Settings

).

From a chart or a 3D chart view, select 

Menu

 > 

Chart Menu

.

Waypoints and Tracks

: See 

Waypoints and Tracks Settings on 

the Charts and Chart Views

.

Other Vessels

: See 

Other Vessels Settings on the Charts and 

Chart Views

.

Surface Radar

: Shows surface radar details on the Perspective 

3D or Mariner's Eye 3D chart views.

Weather Radar

: Shows weather radar imaging on the 

Perspective 3D or Mariner's Eye 3D chart views.

Navaids

: Shows navigational aids on the Fishing chart.

Laylines

: Adjusts the laylines, when in sailing mode (

Laylines 

Settings

).

Chart Setup

: See 

Navigation and Fishing Chart Setup

.

Chart Appearance

: See 

Chart Appearance Settings

. This might 

appear in the Chart Setup menu.

6

Charts and 3D Chart Views

CONFIDENTIAL

Summary of Contents for M5APGT00



















































Reviews: