background image

Marking an SOS Location

You can mark an SOS location. When a Garmin VHF radio is 

connected using NMEA 2000, you can select different SOS 

types, such as Man Overboard and Piracy.

1

From the Home screen, select 

SOS

.

2

Select the SOS type.

3

If necessary, select 

OK

 to navigate to the man overboard 

location.

If you selected OK, the chartplotter sets a direct course back to 

the location. If you selected another type of SOS, the call details 

are sent to the VHF radio. You must send the call using the 

radio.

Viewing a List of all Waypoints

Select 

Info

 > 

User Data

 > 

Waypoints

.

Editing a Saved Waypoint

1

Select 

Info

 > 

User Data

 > 

Waypoints

.

2

Select a waypoint.

3

Select 

Review

 > 

Edit

.

4

Select an option:
• To add a name, select 

Name

, and enter a name.

• To change the symbol, select 

Symbol

.

• To change the depth, select 

Depth

.

• To change the water temperature, select 

Water Temp.

.

• To change the comment, select 

Comment

.

Moving a Saved Waypoint

1

Select 

Info

 > 

User Data

 > 

Waypoints

.

2

Select a waypoint.

3

Select 

Review

 > 

Move

.

4

Indicate a new location for the waypoint:
• To move the waypoint while using the chart, select 

Use 

Chart

, select a new location on the chart, and select 

Move Waypoint

.

• To move the waypoint using coordinates, select 

Enter 

Coordinates

, and enter the new coordinates.

Browsing for and Navigating to a Saved Waypoint

 CAUTION

The Auto Guidance feature is based on electronic chart 

information. That data does not ensure obstacle and bottom 

clearance. Carefully compare the course to all visual sightings, 

and avoid any land, shallow water, or other obstacles that may 

be in your path.
When using Go To, a direct course and a corrected course may 

pass over land or shallow water. Use visual sightings, and steer 

to avoid land, shallow water, and other dangerous objects.

NOTE: 

Auto Guidance is available with premium charts, in some 

areas.
Before you can navigate to a waypoint, you must create a 

waypoint.

1

Select 

Info

 > 

User Data

 > 

Waypoints

.

2

Select a waypoint.

3

Select 

Navigate To

.

4

Select an option:
• To navigate directly to the location, select 

Go To

.

• To create a route to the location, including turns, select 

Route To

.

• To use Auto Guidance, select 

Auto Guidance

.

5

Review the course indicated by the magenta line.

NOTE: 

When using Auto Guidance, a gray segment within 

any part of the magenta line indicates that Auto Guidance 

cannot calculate part of the Auto Guidance line. This is due to 

the settings for minimum safe water depth and minimum safe 

obstacle height.

6

Follow the magenta line, steering to avoid land, shallow 

water, and other obstacles.

Deleting a Waypoint or an MOB

1

Select 

Info

 > 

User Data

 > 

Waypoints

.

2

Select a waypoint or an MOB.

3

Select 

Review

 > 

Delete

.

Deleting All Waypoints

Select 

Info

 > 

User Data

 > 

Clear User Data

 > 

Waypoints

 > 

All

.

Setting and Following a Direct Course Using Go To

 CAUTION

When using Go To, a direct course and a corrected course may 

pass over land or shallow water. Use visual sightings, and steer 

to avoid land, shallow water, and other dangerous objects.

You can set and follow a direct course from your current location 

to a selected destination.

1

Select a destination (

Destinations

).

2

Select 

Navigate To

 > 

Go To

.

A magenta line appears. In the center of the magenta line is 

a thinner purple line that represents the corrected course 

from your current location to the destination. The corrected 

course is dynamic, and it moves with your boat when you are 

off course.

3

Follow the magenta line, steering to avoid land, shallow 

water, and other obstacles.

4

If you are off course, follow the purple line (corrected course) 

to go to your destination, or steer back to the magenta line 

(direct course).

Routes

Creating and Navigating a Route From Your Present 

Location

You can create and immediately navigate a route on the 

Navigation chart or the Fishing chart. This procedure does not 

save the route or the waypoint data.

NOTE: 

The offshore Fishing chart is available with premium 

charts, in some areas.

1

From the Navigation chart or Fishing chart, select a 

destination.

2

Select 

Navigate To

 > 

Route To

.

3

Select the location of the last turn before the destination.

4

Select 

Add Turn

.

5

If necessary, repeat step 3 and 4 to add additional turns, 

working backward from the destination to the present location 

of your vessel.
The last turn you add should be the first turn you make, 

starting from your present location. It should be the turn 

closest to your vessel.

6

If necessary, select 

Menu

.

7

Select 

Navigate Route

.

8

Review the course indicated by the magenta line.

9

Follow the magenta line, steering to avoid land, shallow 

water, and other obstacles.

Navigation with a Chartplotter

9

CONFIDENTIAL

Summary of Contents for M5APGT00



















































Reviews: