background image

Sailing Features

Setting the Vessel Type

You can select your boat type to configure the chartplotter 

settings and to use features customized for your boat type.

1

Select 

Settings

 > 

My Vessel

 > 

Vessel Type

.

2

Select 

Powerboat

 or 

Sailboat

.

Sail Racing

You can use the device to increase the likelihood that your boat 

will cross the start line of a race exactly when the race begins. 

When you synchronize the race timer with the official race 

countdown timer, you are alerted at one-minute intervals as the 

race start approaches. When you combine the race timer with 

the virtual start line, the device measures your speed, bearing, 

and remaining time on the countdown timer. The device uses 

this data to indicate whether your boat will cross the start line 

before, after, or at the correct time to start the race.

Starting Line Guidance

Sailing start line guidance is a visual representation of the 

information you need to cross the start line at the optimal time 

and speed.
After you set the starboard and port start line pins, and the 

target speed and time, and after you start the race timer, a 

predictor line appears. The predictor line extends from your 

current location toward the start line and the laylines that extend 

from each pin.
The end point and color of the predictor line indicate where the 

boat will be when the timer expires, based on your current boat 

speed.
When the end point is before the start line, the line is white. This 

indicates the boat must increase speed to reach the start line on 

time.
When the end point is past the start line, the line is red. This 

indicates the boat must reduce speed to avoid a penalty for 

reaching the start line before the timer expires.
When the end point is on the start line, the line is white. This 

indicates the boat is moving at an optimal speed to reach the 

start line when the timer expires.
By default, the start line guidance window and the race timer 

window appear in the Sail Racing combination screen.

Setting the Starting Line

The start line guidance window is added to the Sail Racing 

combination screen by default.

1

From the Sail Racing combination screen, select 

Menu

 > 

Start Line Guidance

 > 

Start Line

.

2

Select an option:
• To mark the port and starboard starting line marks as you 

sail past them, select 

Ping Marks

.

• To mark the port and starboard starting line marks by 

entering their coordinates, select 

Enter Coordinates

.

• To switch the position of the port and starboard marks 

after you have set them, select 

Swap Port & Starbd. 

Marks

.

Using the Starting Line Guidance

You can use the starting line guidance feature to help get you 

cross the start line, at the optimal speed during a sailing race.

1

Mark the starting line (

Setting the Starting Line

).

2

From the Sail Racing combination screen, select 

Menu

 > 

Start Line Guidance

 > 

Target Speed

, and select your target 

speed when crossing the starting line.

3

Select 

Target Time

, and select the target time to cross the 

starting line.

4

Select 

Back

.

5

Start the racing timer (

Starting the Race Timer

).

Starting the Race Timer

The race timer is added to the Sail Racing combination screen 

by default.

1

From the Sail Racing combination screen, select 

Start

.

NOTE: 

You can also access this from the Sailing SmartMode 

screen and the navigation chart.

2

When necessary, select 

Sync

 to synchronize with the official 

race timer.

Stopping the Race Timer

From the Sail Racing combination screen, select 

Stop

.

Setting the Distance between the Bow and the GPS 

Antenna

You can enter the distance between the bow of your boat and 

the location of your GPS antenna. This helps ensure the bow of 

your boat crosses the starting line at the precise start time.

1

From a navigation chart, select 

Sailing

 > 

Start Line

 > 

GPS 

Bow Offset

.

2

Enter the distance.

3

Select 

Done

.

Laylines Settings

When in sailing mode (

Setting the Vessel Type

), you can display 

laylines on the navigation chart. Laylines can be very helpful 

when racing.
From the navigation chart, select 

Menu

 > 

Chart Menu

 > 

Sailing 

Laylines

.

Display

: Sets how the laylines and vessel are shown on the 

chart, and sets the length of the laylines.

Sailing Ang.

: Allows you to select how the device calculates 

laylines. The Actual option calculates the laylines using the 

measured wind angle from the wind sensor. The Manual 

option calculates the laylines using manually entered 

windward and leeward angles.

Tide Correction

: Corrects the laylines based on the tide.

Setting the Keel Offset

You can enter a keel offset to compensate the surface reading 

for the depth of a keel, making it possible to measure depth from 

the bottom of the keel instead of from the transducer location. 

Enter a positive number to offset for a keel. You can enter a 

negative number to compensate for a large vessel that may 

draw several feet of water.

1

Complete an action, based on the location of the transducer:
• If the transducer is installed at the water line 

À

, measure 

the distance from the transducer location to the keel of the 

boat. Enter this value in steps 3 and 4 as a positive 

number.

• If the transducer is installed at the bottom of the keel 

Á

measure the distance from the transducer to the water 

line. Enter this value in steps 3 and 4 as a negative 

number.

Sailing Features

13

CONFIDENTIAL

Summary of Contents for M5APGT00



















































Reviews: