background image

Forecasting Fish Locations

You can show areas that contain optimal weather conditions for 

specific species of fish.

NOTE: 

This feature is not available on all devices and in all 

subscriptions.

1

From the weather Fishing chart, select 

Menu

 > 

Weather 

Menu

 > 

Fish Species

.

2

Select a species of fish.

3

Select 

On

.

4

Repeat steps 2 and 3 to show areas with optimal weather 

conditions for additional species of fish.
Shaded areas indicate optimal fishing areas. If you have 

selected more than one species of fish, you can select a 

shaded area to view the fish species that are included in the 

shaded area.

Changing the Sea Surface Temperature Color Range

You can change the color range dynamically to view higher 

resolution sea surface temperature readings.

1

From the weather Fishing chart, select 

Menu

 > 

Weather 

Menu

 > 

Sea Temperature

.

2

Select an option:
• To allow the chartplotter to adjust the temperature range 

automatically, select 

Auto Configure

.

The chartplotter automatically finds the lower and upper 

limits for the current screen, and updates the temperature-

color scale.

• To enter the lower and upper limits for the temperature 

range, select 

Lower Limit

 or 

Upper Limit

, and enter the 

lower or upper limit.

Visibility Information

Visibility is the forecast maximum horizontal distance that can be 

seen at the surface, as shown in the legend on the left of the 

screen. Variations in the visibility shading show the forecast 

change in surface visibility.

NOTE: 

This feature is not available on all devices and in all 

subscriptions.
Select 

Charts

 > 

Visibility

.

Viewing Forecast Visibility Information for Another 

Time Period

1

Select 

Charts

 > 

Visibility

.

2

Select an option:
• To view the visibility forecast for the next 36 hours, in 12-

hour increments, select 

Next Forecast

 multiple times.

• To view the visibility forecast for the previous 36 hours, in 

12-hour increments, select 

Previous Forecast

 multiple 

times.

Viewing Buoy Reports

Report readings are taken from buoys and coastal observation 

stations. These readings are used to determine air temperature, 

dew point, water temperature, tide, wave height and period, 

wind direction and speed, visibility, and barometric pressure.

1

From a weather chart, select  .

2

Select 

Buoy

.

Viewing Local Weather Information near a Buoy

You can select an area near a buoy to view forecast information.

1

From a weather chart, select a location on the chart.

2

Select 

Local Weather

.

3

Select an option:
• To view present weather conditions from a local weather 

service, select 

Current Cond.

.

• To view a local weather forecast, select 

Forecast

.

• To view surface wind and barometric pressure 

information, select 

Sea Surface

.

• To view wind and wave information, select 

Marine 

Bulletin

.

Creating a Waypoint on a Weather Chart

1

From a weather chart, select a location.

2

Select 

Create Waypoint

.

Weather Overlay

The weather overlay superimposes weather and weather-related 

information on the Navigation chart, the Fishing chart, and the 

Perspective 3D chart view. The Navigation chart and the Fishing 

chart can show weather radar, height of cloud tops, lightning, 

weather buoys, county warnings, and hurricane warnings. The 

Perspective 3D chart view can show weather radar.
Weather overlay settings configured for use on one chart are not 

applied to another chart. The weather overlay settings for each 

chart must be configured separately.

NOTE: 

The offshore Fishing chart is available with premium 

charts, in some areas.

Turning On the Weather Overlay on a Chart

From the Navigation chart or Fishing chart, select 

Menu

 > 

Chart Setup

 > 

Weather

 > 

Weather

 > 

On

.

Weather Overlay Settings on the Navigation Chart

From the Navigation chart, select 

Menu

 > 

Chart Setup

 > 

Weather

.

Weather

: Turns on and off the weather overlay.

Precipitation

: Shows precipitation data.

Cloud Cover

: Shows cloud cover data.

Visibility

: Shows visibility data.

Buoys

: Shows weather buoys.

Legend

: Shows the weather legend.

Weather Overlay Settings on the Fishing Chart

NOTE: 

Available settings depend on the receiver connected to 

your device.
From the Fishing chart, select 

Menu

 > 

Chart Setup

 > 

Weather

.

Precipitation

: Shows precipitation radar.

Fish Species

: Shows locations of a specific species of fish.

Sea Temperature

: Shows sea temperature data.

Buoys

: Shows weather buoys.

Legend

: Shows the weather legend.

Viewing Weather Subscription Information

You can view information about the weather services you have 

subscribed to and how many minutes have passed since the 

data for each service was updated.

From a weather chart, select 

Menu

 > 

Weather 

Subscription

.

Viewing Video

Before you can view video, you must connect to a compatible 

source.
Compatible devices include video devices connected to the 

ports on the chartplotter, as well as supported network (IP-

based) video cameras, encoders, and thermal cameras.

Select 

A/V, Gauges, Controls

 > 

Video

.

32

Viewing Video

CONFIDENTIAL

Summary of Contents for M5APGT00



















































Reviews: