background image

User’s manual maps + more 

- 60 - 

Options, more functions 

Factory settings: Resets all settings to the as-delivered state. Routes and saved 

destinations are deleted. The software is re-started and behaves as if 
started for the first time after being purchased. 

GPS status: Opens the 

GPS

 STATUS

 window. Here you can see details 

regarding GPS reception. You can also save the data of the current 
location (see "GPS status, saving the current location" on page 94). 

Home address: Saves the selected destination as your home address. You can 

then always start navigation to this destination very quickly by tapping in 
the 

N

AVIGATION

 window on Take me home. 

Interim destination: Sets the selected point as interim destination. The 

navigation system will first guide you to this interim destination. 
Afterwards you can continue navigation to your original destination. 

Manual: Opens the manual on the navigation device (see "Manual" on 

page 20). 

MyReport: Opens the 

M

Y

R

EPORT

 window. Here you can notify 

Garmin Würzburg about any changes to traffic monitoring systems and 
routing. 

MyRoutes: Opens the map in 

Preview

 mode. You are provided with up to three 

different suggestions as to how you can continue your journey. Select 
one of the routes offered. 

New route: Deletes the starting point and all route points from the 

R

OUTES AND 

TRACKS

 window so that you can plan a new route. If necessary, save 

the previously planned route! 

Parking: Starts the search for car parks near the destination. Once you have 

decided in favour of a car park, you can navigate there directly. 

POIs on your route: Opens a list with POIs lying on your route. A destination 

shown here can be selected as an interim destination and can be 
navigated to (refer to "MyBest POI: POIs on your route" on page 87). 

Product information: Here you are shown the version numbers and copyright 

details of the hardware and software. 

 Range 360: Presents the charging status as a radius of action on the map 

(see "

 Range 360 map view" on page 76). 

Rename: Opens a window in which you can change the name for the selected 

destination or route. 

Summary of Contents for maps plus more














































































































































































Reviews: