background image

5

If necessary, enter a distance or time value, and select  .

System Settings

Hold 

MENU

, and select 

System

.

Language

: Sets the language displayed on the device.

Time

: Adjusts the time settings (

Time Settings

, page 33

).

Backlight

: Adjusts the backlight settings (

Changing the 

Backlight Settings

, page 33

).

Sounds

: Sets the device sounds, such as key tones, alerts, and 

vibrations.

Do Not Disturb

: Turns on or off do not disturb mode. Use the 

Sleep Time option to turn on do not disturb mode 

automatically during your normal sleep hours. You can set 

your normal sleep hours on your Garmin Connect account.

Hot Keys

: Allows you to assign shortcuts to device keys 

(

Customizing the Hot Keys

, page 33

).

Auto Lock

: Allows you to lock the keys automatically to prevent 

accidental key presses. Use the During Activity option to lock 

the keys during a timed activity. Use the Not During Activity 

option to lock the keys when you are not recording a timed 

activity.

Units

: Sets the units of measure used on the device (

Changing 

the Units of Measure

, page 33

).

Format

: Sets general format preferences, such as the pace and 

speed shown during activities, the start of the week, and 

geographical position format and datum options.

Data Recording

: Sets how the device records activity data. The 

Smart recording option (default) allows for longer activity 

recordings. The Every Second recording option provides 

more detailed activity recordings, but may not record entire 

activities that last for longer periods of time.

USB Mode

: Sets the device to use MTP (media transfer 

protocol) or Garmin mode when connected to a computer.

Reset

: Allows you to reset user data and settings (

Resetting All 

Default Settings

, page 36

).

Software Update

: Allows you to install software updates 

downloaded using Garmin Express.

About

: Displays device, software, license, and regulatory 

information.

Time Settings

Hold 

MENU

, and select 

System

 > 

Time

.

Time Format

: Sets the device to show time in a 12-hour, 24-

hour, or military format.

Set Time

: Sets the time zone for the device. The Auto option 

sets the time zone automatically based on your GPS position.

Time

: Allows you to adjust the time if it is set to the Manual 

option.

Alerts

: Allows you to set hourly alerts, as well as sunrise and 

sunset alerts that sound a specific number of minutes or 

hours before the actual sunrise or sunset occurs (

Setting 

Time Alerts

, page 33

).

Sync With GPS

: Allows you to manually sync the time with GPS 

when you change time zones, and to update for daylight 

saving time (

Syncing the Time with GPS

, page 33

).

Setting Time Alerts

1

Hold 

MENU

.

2

Select 

System

 > 

Time

 > 

Alerts

.

3

Select an option:
• To set an alert to sound a specific number of minutes or 

hours before the actual sunset occurs, select 

Til Sunset

 > 

Status

 > 

On

, select 

Time

, and enter the time.

• To set an alert to sound a specific number of minutes or 

hours before the actual sunrise occurs, select 

Til Sunrise 

Status

 > 

On

, select 

Time

, and enter the time.

• To set an alert to sound every hour, select 

Hourly

 > 

On

.

Syncing the Time with GPS

Each time you turn on the device and acquire satellites, the 

device automatically detects your time zones and the current 

time of day. You can also manually sync the time with GPS 

when you change time zones, and to update for daylight saving 

time.

1

Hold 

MENU

.

2

Select 

System

 > 

Time

 > 

Sync With GPS

.

3

Wait while the device locates satellites (

Acquiring Satellite 

Signals

, page 37

).

Changing the Backlight Settings

1

Hold 

MENU

.

2

Select 

System

 > 

Backlight

.

3

Select an option:
• Select 

During Activity

.

• Select 

Not During Activity

.

4

Select an option:
• Select 

Keys

 to turn on the backlight for key presses.

• Select 

Alerts

 to turn on the backlight for alerts.

• Select 

Gesture

 to turn on the backlight by raising and 

turning your arm to look at your wrist.

• Select 

Timeout

 to set the length of time before the 

backlight turns off.

• Select 

Brightness

 to set the brightness level of the 

backlight.

Customizing the Hot Keys

You can customize the hold function of individual keys and 

combinations of keys.

1

Hold 

MENU

.

2

Select 

System

 > 

Hot Keys

.

3

Select a key or combination of keys to customize.

4

Select a function.

Changing the Units of Measure

You can customize units of measure for distance, pace and 

speed, elevation, weight, height, and temperature.

1

Hold 

MENU

.

2

Select 

System

 > 

Units

.

3

Select a measurement type.

4

Select a unit of measure.

Viewing Device Information

You can view device information, such as the unit ID, software 

version, regulatory information, and license agreement.

1

Hold 

MENU

.

2

Select 

System

 > 

About

.

Viewing E-label Regulatory and Compliance 

Information

The label for this device is provided electronically. The e-label 

may provide regulatory information, such as identification 

numbers provided by the FCC or regional compliance markings, 

as well as applicable product and licensing information.

1

Hold 

MENU

.

2

From the system menu, select 

About

.

Customizing Your Device

33

Summary of Contents for MARQ DRIVER





















































Reviews: